amplifiers. FBV Express delivers instant access to amp channel memories via four gig-ready footswitches built into a road-ready steel enclosure. FBV Express also enables tap tempo for effects, and the built-in, chromatic tuner allows for quick and accurate tuning. A full size, heavy-duty Volume/Wah pedal adds must-have control for the performing guitarist. FBV Express connects via standard RJ-45 cable, and is also fully compatible with PODxt and PODxt Pro guitar and bass series products. Features: Switches for Channels A, B, C, & D Tap on the current channel for Tap Tempo Wah / Volume pedal Chromatic tuner Self-powered though the locking RJ-45 cable (included) COMPATIBLE PRODUCTS: Spider II, III, Valve & Jam Flextone III Vetta Vetta II HD147 PODXT, & PODXT Pro Bass PODXT, & Bass PODXT Pro  (less)

dbx® DriveRack® or ZonePro™ device. The device shall be a dbx ZC-BOB remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

selection for the dbx ZonePro™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-4 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

voltage output. The remote device shall have DIP switches allowing identificationwith connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-FIRE remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

RJ-45 connectors. The device shall be a dbx ZC-7 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-8 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

for the dbx ZonePro™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-3 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

connection to the processing device via CAT 5 cable on The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

cable on RJ-45 connectors. The device shall be a dbx ZC-6 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-1 remote controller. The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push-to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows ""home run"" or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. Features: Programmable Volume Control Program or Scene Selection Programable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-to-Talk Paging Programmable Source Selection"  (less)

needed 2x DLS 15P Powered Speakers 2x SPS-1B Speaker Stands 2x MC-25, 25 ft. speaker cables 1x DCD-PRO310 Dual CD Player Fader ""Q"" Start +10 track advance button Mechanical Anti Skip Protection Flip Flop (Relay Playback) Pitch Control (+/-4%, +/-8% or +/-16%) Pitch Bend S/PDIF digital output for each player Bright LCD display Single/Continue and Time viewing Reads CD and CD-R media Dimensions (LxWxH): Player unit: 10"" x 19"" x 3.5"" / 254x482x89mm Controller: 2.5"" x 19"" x 3.5"" / 64x482x89mm (2-space) Weight:15 Lbs./ 7kgs. 1x Q-2411 Mixer 4-channel, 19-inch Professional DJ mixer 3 Phono, 5 Line, 3 Aux & 2 Mic Inputs Fader ""Q"" Start Compatible (with select American Audio CD Players) Balanced XLR Outputs 5 band EQ Separate volume for each microphone High Quality Feather Fader™ For Smooth, Clean Crossfades (Replaceable) Dimensions (LxWxH): 7"" x 19"" x 3.75"" / 177x483x97mm, 4 rack spaces Weight: 7 lbs. / 3 kgs. also includes 1x TLC 8x4 Road case 1x DJ Headphones 1x DJ Microphone All component cables needed 2x DLS 15P Powered Speakers High Powered 15-inch, 2-way speaker Die cast woofer with 3-inch voice coil High compression 1.75"" driver Built-in high-powered amplifier system ABS nylon fiber cabinet with handle XLR & RCA line inputs Two microphone inputs (XLR & 1/4"" stereo) with separate microphone volume control Treble, bass and volume output control Trapezoidal design Flyable & stand mountable Floor monitor brackets included 120V/220V switchable Sensitivity: 109 dB/m/w Dimensions (LxWxH): 13.6"" x 16.5"" x 26.4 / 345 x 419 x 671 mm Weight: 61 lbs. / 28 kgs. DLS-15P fits into optional APX-B Speaker Transport Bag 2x SPS-1B Speaker Stands 2x MC-25, 25 ft. speaker cables Get your American Audio Mobile-310DLS today!"  (less)

the culmination of a decade's worth of evolution and innovation since the birth of the original Valvestate. All models now feature a new contemporary look and all AVT50X, AVT100X, and AVT150X models include automatic variable speed fans, ensuring their place as the market leader. Both the AVT150X and AVT150HX boast more channels and features than any Valvestate amplifier before. Their four channels are: Acoustic Simulator, Clean, Overdrive 1, and Overdrive 2. Acoustic Simulator: As its name suggests, the Acoustic Simulator channel transforms the sound of a standard electric guitar into that of an acoustic guitar with amazing authenticity. Referring to a Guitarist magazine review: ""The Acoustic Simulator is a brilliant idea -- a first for a non-digital amp -- and the tonal effect is extremely convincing with single coil pickups, allowing a guitarist to switch instantly from electric to acoustic sounds without changing guitars or amps."" For even further flexibility, the AVT150X and AVT150HX house a pair of adjustable DFX sections -- one for the Acoustic/Clean channels and the other for Overdrive1/Overdrive 2. Both DFX sections are on/off foot-switchable via the supplied 6-way LED foot controller. Clean: From the cleanest clean to a natural, valve-induced, bluesy crunch and anywhere in-between. A Bright switch enhances high-end definition at low Gain settings. Overdrive 1: Takes you from the dynamic raunch of a 1959 'Plexi' to the larger-than-life crunch of a cranked JCM800. A Scoop switch reconfigures the EQ to give you that classic thrash sound of the '80s. Overdrive 2: From the primal angst of a hot-rodded JCM800 to extreme gain. Hit the Scoop switch to produce the brutal, bone-crushing slam of modern ('nu') metal. The 16 DFX are adjusted by the following controls: DFX Mix, DFX Adjust, and DFX Select. A Parallel FX Loop, complete with Mix control, is also included for added flexibility. The supplied 4-way LED foot controller allows you to switch the DFX on/off. Other features include a Headphone jack and a Speaker Emulated Line Out. Marshall AVT150HX Features: Marshall AVT150HX Gitarren Head 150 Watt, Hybridtechnologie 2 Kchannel with EQ rAccutronics Reverb CD Input,Emulated DI-Out FX-Loop, KHeadphone output Size:674x250x254mm weight 12.4 kg Marshall AVT150HX Specifications: Output (RMS): 150 watts Impedance: minimum 4 ohms Speaker: no Channels: 4 Acoustic simulator Digital FX + select switch x 2 Parallel FX loop FX level switch FX mix controls x 2 Scoop switch x 2 Bright switch Emulated line out Headphone jack Master volume Master presence control Speaker outputs: 2 external Foot controller (supplied): PEDL-10031 Dimensions (mm): 680 x 310 x 260 Weight (kg): 16 Buy Today & We'll Throw In"  (less)