LX88 Receivers. Get Your Shure PS20 Today !  (less)

12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches. Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however. A Furman PowerLink can also be used to control MINIPORT(s). In this use, the MINIPORT(s) are connected to terminals on the PowerLink, which provide the necessary control functions. MINIPORTs are similarly compatible with the Furman PowerPort and ASD-120 Sequenced Power Distro. With the addition of a PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other Furman power product or, for that matter, any product with a switched outlet, such as a receiver/ amp controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off. The MINIPORT-20 comes equipped with two knockout holes for permanent installation with 1/2"" conduit one on the top surface, the other on the bottom. Use of the bottom knockout hole requires removing the AC cord. According to the National Electrical Code, 1/2"" conduit can accommodate up to five 20 amp circuits using ten THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements. MINIPORTs are housed in rugged steel enclosures and come equipped with a heavy duty, 10 foot AC cord. The MINIPORT-20 is equipped with a precision magnetic circuit breaker. The MINIPORT-20 and MINIPORT-15 are UL and CUL (Canadian) listed. Note: Because of its UL listed 20 amp rating, the MINIPORT-20 uses a 20 amp AC plug with perpendicular (not parallel) blades. If in doubt regarding your installation, please consult an electrician or call the factory. The MINIPORT-20 is an upgrade of an earlier Furman MINIPORT. The primary differences are the ability to use momentary switches, the delayed turn-on option, and the additional knockout holes. Furman MP-20 Specifications: Dimensions: 5.5"" H x 3.75"" W x 2"" D. (With mounting bracket, the width is 5.25"") Get your Furman MP-20 today"  (less)

12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches. Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however. A Furman PowerLink can also be used to control MINIPORT(s). In this use, the MINIPORT(s) are connected to terminals on the PowerLink, which provide the necessary control functions. MINIPORTs are similarly compatible with the Furman PowerPort and ASD-120 Sequenced Power Distro. With the addition of a PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other Furman power product or, for that matter, any product with a switched outlet, such as a receiver/ amp controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off. The MINIPORT-20Q comes equipped with two knockout holes for permanent installation with 1/2"" conduit one on the top surface, the other on the bottom. Use of the bottom knockout hole requires removing the AC cord. According to the National Electrical Code, 1/2"" conduit can accommodate up to five 20 amp circuits using ten THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements. MINIPORTs are housed in rugged steel enclosures and come equipped with a heavy duty, 10 foot AC cord. The MINIPORT-20Q is equipped with a precision magnetic circuit breaker. The MINIPORT-20Q and MINIPORT-15 are UL and CUL (Canadian) listed. Note: Because of its UL listed 20 amp rating, the MINIPORT-20Q uses a 20 amp AC plug with perpendicular (not parallel) blades. If in doubt regarding your installation, please consult an electrician or call the factory. The MINIPORT-20Q is an upgrade of an earlier Furman MINIPORT. The primary differences are the ability to use momentary switches, the delayed turn-on option, and the additional knockout holes. The MINIPORT-20Q provides a pair of remotely activated, relay-controlled outlets which are both set up for mounting in any standard electrical Quad Box, either directly or with a ""mud ring"" attached. Due to the space limitations of a Quad Box, the MP-20Q has no internal power supply; a maintained 10-30VDC supply capable of supplying 10 mA is required to turn on the outlets. This can be s"  (less)

ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. Power On Indicator Receiving Antenna Indicators SQUELCH Indicator SCAN Indicator for Scanning Open Group and/or Channel Frequencies Transmitted (TX) Audio Indicators Group/Channel/Frequency Displays TV Channel Display Frequency and Volume Locks ""RF"" Level Indicators Transmitter Battery Life Indicator MODE Button for Menu Display SET Button for Saving Settings Display Control Knob Level Control Mic/Line level Switch XLR and 1/4"" outputs with level control PS40, PS40E, PS40J or PS40UK in-line power supply with locking DC connector Space-saving 1/2 rack design Single and dual rack mounting hardware included Transmitter: 8-9 Hour Battery Life Power On/Off Switch Power/Battery LED-Green When ON, Red When Battery Low Three-segment Battery Power Icon PEAK Icon-Appears When Audio Signal Overloads Group/Channel Displays MODE Button for Menu Display SET Button for Saving Settings Adjustable Audio Gain Control Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output 4-pin Mini Connector Battery Cover Unscrews to Expose Battery and Gain Control 9V Battery Included Get your Shure ULXP24/BETA87A Includes ULX2/BETA87A Handheld Transmitter With BETA87A Microphone Today !!!"  (less)

advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. Power On Indicator Receiving Antenna Indicators SQUELCH Indicator SCAN Indicator for Scanning Open Group and/or Channel Frequencies Transmitted (TX) Audio Indicators Group/Channel/Frequency Displays TV Channel Display Frequency and Volume Locks ""RF"" Level Indicators Transmitter Battery Life Indicator MODE Button for Menu Display SET Button for Saving Settings Display Control Knob Level Control Mic/Line level Switch XLR and 1/4"" outputs with level control PS40, PS40E, PS40J or PS40UK in-line power supply with locking DC connector Space-saving 1/2 rack design Single and dual rack mounting hardware included Body-Pack Transmitter: The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility. 8-9 Hour Battery Life Power On/Off Switch Power/Battery LED-Green When ON, Red When Battery Low Three-segment Battery Power Icon PEAK Icon-Appears When Audio Signal Overloads Group/Channel Displays MODE Button for Menu Display SET Button for Saving Settings Adjustable Audio Gain Control Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output 4-pin Mini Connector Belt Clip 9V Battery Included WH30TQG Headset Microphone: Adjustable wireframe, elastic headband, microphone cartridge and windscreen, microphone boom, isolation shock mount, boom hinge and cable. Get your Shure ULXP14/30 Includes WH30TQG Cardioid Condenser Headworn Microphone Today !!!"  (less)

microphones. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Shure ULXP24/BETA58 Includes: Handheld Transmitter with Beta 58A Cardioid Microphone: 3-segment battery fuel guage, Backlit LCD shows group and channel, Frequency and power settings, Control lockout, 8 hour battery life, 300 ft (92 m) operating range. ULXP4 Diversity Receiver: Automatic Frequency Selection, Over 1400 selectable freqencies, Predictive Diversity, 5-segment audio meter, 5-segment RF meter, Advanced multi-function LCD, 3-segment transmitter battery fuel guage, Squelch adjustment, 1/2 rack design, In-Line power, Remotable 1/2 wave antenna, Frequency and volume lockout, Rugged metal chassis, Furnished rack hardware, Locking DC connector, XLR and 1/4"" outputs. A choice of legendary Shure vocal microphones is available for use with the ULX Standard or Professional series handheld wireless transmitters. Choose from the SM58® and Beta Series microphones to ride the clear channel transmission and flexibility of the ULX series handheld wireless transmitters. 8-9 Hour Battery Life Power On/Off Switch Power/Battery LED-Green When ON, Red When Battery Low Three-segment Battery Power Icon PEAK Icon-Appears When Audio Signal Overloads Group/Channel Displays MODE Button for Menu Display SET Button for Saving Settings Adjustable Audio Gain Control Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output 4-pin Mini Connector Battery Cover Unscrews to Expose Battery and Gain Control 9V Battery Included The Shure ULX Professional wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. Power On Indicator Receiving Antenna Indicators SQUELCH Indicator SCAN Indicator for Scanning Open Group and/or Channel Frequencies Transmitted (TX) Audio Indicators Group/Channel/Frequency Displays TV Channel Display Frequency and Volume Locks ""RF"" Level Indicators Transmitter Battery Life Indicator MODE Button for Menu Display SET Button for Saving Settings Display Control Knob Level Control Mic/Line level Switch XLR and 1/4"" outputs with level control PS40, PS40E, PS40J or PS40UK in-line power supply with locking DC connector Space-saving 1/2 rack design Single and dua"  (less)

transmitters. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. Model: ULXS14/98H WB98H/C Instrument Mic ULX1 Bodypack Transmitter ULXS4 Standard Diversity Receiver WB98H/C Instrument Mic The Shure Beta 98H/C (AKA as the WB98H/C for use with wireless systems) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. ULX1 Body Pack Transmitter The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility. 8-9 Hour Battery Life Power On/Off Switch Power/Battery LED-Green When ON, Red When Battery Low Three-segment Battery Power Icon PEAK Icon-Appears When Audio Signal Overloads Group/Channel Displays MODE Button for Menu Display SET Button for Saving Settings Adjustable Audio Gain Control Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output 4-pin Mini Connector Belt Clip 9V Battery Included ULXS4 Diversity Receiver The Shure ULX Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached. Power On Indicator ""RF"" Diversity Signal Indicators Transmitted (TX) Audio Indicators Receiving Antenna Indicator Group/Channel Displays Transmitter Battery Life Indicator MODE Button for Menu Display SET Button for Saving Settings Mic/Line level Switch XLR and 1/4"" outputs with level control PS40, PS40E, PS40J or PS40UK in-line power supply with locking DC connector Space-saving 1/2 rack design Get your Shure ULXS14/98H- WB98H/C Cardioid Condenser Instrument Microphone Today !!!"  (less)

transmitters. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. Model: ULXS14/93 WL93 Micro-Lavalier Mic ULX1 Bodypack Transmitter ULXS4 Standard Diversity Receiver WL93 (Omnidirectional) Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications. All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter. ULX1 Body Pack Transmitter The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility. 8-9 Hour Battery Life Power On/Off Switch Power/Battery LED-Green When ON, Red When Battery Low Three-segment Battery Power Icon PEAK Icon-Appears When Audio Signal Overloads Group/Channel Displays MODE Button for Menu Display SET Button for Saving Settings Adjustable Audio Gain Control Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output 4-pin Mini Connector Belt Clip 9V Battery Included ULXS4 Diversity Receiver The Shure ULX Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached. Power On Indicator ""RF"" Diversity Signal Indicators Transmitted (TX) Audio Indicators Receiving Antenna Indicator Group/Channel Displays Transmitter Battery Life Indicator MODE Button for Menu Display SET Button for Saving Settings Mic/Line level Switch XLR and 1/4"" outputs with level control PS40, PS40E, PS40J or PS40UK in-line power supply with locking DC connector Space-saving 1/2 rack design Get your Shure ULXS14/93- WL93 Omnidirectional Micro Lavalier Microphone Today !!!"  (less)

and outlet, and is housed in a heavy duty steel, 8"" x 8"" x 4"" junction box. This model includes an internal 12 VDC supply, and can be controlled from a remote location by using the Furman PowerLink Remote AC Power Sequence Controller, the ASD-120 Sequenced Power Distro, or for simpler jobs, the Furman RS-1 or RS-2 Remote System Control panels. The RS-1 provides a maintained key switch; the RS-2 has a momentary switch. Multiple MINIPORTs have their control wiring paralleled so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed operation is chosen, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously. All four sides of the enclosure have multiple knockouts to accommodate every installation, with 3/4"" conduit- one on the top surface, the other on the bottom. According to the National Electrical Code, 3/4"" conduit can accommodate up to eight 20 amp circuits using sixteen THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements. With the addition of a Furman PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other product that has a switched outlet, such as a receiver/amp that is then controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off. Furman MP-30 Specification: Dimensions: 8"" H x 8"" W x 4"" D. Get your Furman MP-30 today"  (less)

12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches. Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however. A Furman PowerLink can also be used to control MINIPORT(s). In this use, the MINIPORT(s) are connected to terminals on the PowerLink, which provide the necessary control functions. MINIPORTs are similarly compatible with the Furman PowerPort and ASD-120 Sequenced Power Distro. With the addition of a PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other Furman power product or, for that matter, any product with a switched outlet, such as a receiver/ amp controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off. The MINIPORT-15 comes equipped with two knockout holes for permanent installation with 1/2"" conduit one on the top surface, the other on the bottom. Use of the bottom knockout hole requires removing the AC cord. According to the National Electrical Code, 1/2"" conduit can accommodate up to five 20 amp circuits using ten THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements. MINIPORTs are housed in rugged steel enclosures and come equipped with a heavy duty, 10 foot AC cord. The MINIPORT-15 is fused. The MINIPORT-15 is UL and CUL (Canadian) listed. Furman MP-15 Specifications 5.5"" H x 3.75"" W x 2"" D. (With mounting bracket, the width is 5.25"") Get your Furman MP today"  (less)