microphone operation. The body-pack can be configured for wireless instrument operation when used with the MKGL instrument cable. This system includes the SR40 single receiver, PT40 Pro body-pack transmitter and MKGL instrument cable. The SR40 single receiver is a half-rack mountable unit with balanced XLR and unbalanced 1/4"" phone outputs on the rear. The front panel features a single antenna, volume control and LED indicators. The PT40 Pro body-pack transmitter includes the MKGL instrument cable. The MKGL instrument cable features a mini 3-pin XLR and 1/4"" Phone connectors for wireless operation via the PT40 Pro body-pack. The PT40 Pro boasts up to 30 hours of power on a standard single AA alkaline battery. AKG WMS40/PRO/PT/GT Features: UHF Operation The WMS40 Series features UHF operation for greater range and low drop-out and noise. Balanced and Unbalanced Output The SR40 features a balanced XLR and unbalanced 1/4"" phone output connectors. Comprehensive LED Display The front panel on the SR40 features RF reception, Mute and Clip LEDs. Comprehensive LED Display The front panel on the SR40 features RF reception, Mute and Clip LEDs. AKG WMS40/PRO/PT/GT Specifications: System: Type of System Rack/Table Top Mountable UHF Diversity System RF Carrier Frequency Range 60B / 751.550 MHz Approx. Working Range 330 Feet (100 m) Overall Frequency Response 65Hz to 20kHz Signal-to-Noise Ratio >110 dB(A) Of Channels Single channel, single frequency Of Simultaneous Systems Not Specified by Manufacturer SR40 Single Receiver: Type of Receiver UHF Half Rack Mount Type of Outputs Balanced 3-pin XLR-male, switchable from -30 to +6dB Unbalanced 1/4"" Phone jack (6.5mm) Headphone Monitoring No Power Requirements Current Consumption: 115mA/12V Power Requirement: 120/230 VAC 50/60 Hz Battery Type/Approx. Life not applicable Display RF Status, Mute and Clip LEDs Mounting Options Table Top / Rack Mount (rack-mount hardware included) Antenna Type BNC Dimensions (W x D x H) 7.8 x 7.4 x 1.7"" (200 x 190 x 44mm) Weight 1.4 lbs (630 g) GB40 Guitar Bug Instrument Transmitter: Type of Transmitter Guitar Plug-In Type of Input Connector 1/4"" Phone Male Battery Type/Approx. Life (1)AAA Alkaline Battery: 10 hours CU40 Rechargeable: 5 hours Mute Switch Lockable On/Off and Mute available Level Control Recessed Level Dial Antenna Type External Whip Display Power LED Dimensions 3 x 0.8 x 1.1"" (76 x 20 x 28mm) Weight 28 g / 1 oz Get your AKG WMS40/PRO/PT/GT today!"  (less)

agile system with one-touch Auto-ClearScan™, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features. This BPU-2 Wireless Bodypack System includes 1112 Channel transmitter transmitter with TA4F connector. Can be used for mic or guitar/instrument (mic or cord not included). Electro Voice BPU-2Pro Features: 30 mW typical output 1112 Channel wireless bodypack transmitter Can be used for mic or guitar/instrument (mic or cord not included) >8 hours life with 9V alkaline battery External 1/4 wave antenna 3.8"" H x 2.6"" W x 0.92"" D Cellphone-style belt clip Get your Electro Voice BPU-2Pro today!"  (less)

agile system with one-touch Auto-ClearScan™, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features. This BPU-2Pro-REF Wireless Bodypack System includes 1112 Channel transmitter transmitter with TA4F connector which is wired for use with the RSB-2 referee mute switch. Electro Voice BPU-2PRO-REF Features: 30 mW typical output 1112 Channel wireless bodypack transmitter Can be used for mic or guitar/instrument (mic or cord not included) >F8 hours life with 9V alkaline battery External 1/4 wave antenna 3.8"" H x 2.6"" W x 0.92"" D Cellphone-style belt clip Get your Electro Voice BPU-2PRO-REF today!"  (less)

system with one-touch Auto-ClearScan™, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features. This BPU-2 Wireless Bodypack System includes 1112 Channel transmitter transmitter with TA4F connector. Can be used for mic or guitar/instrument (mic or cord not included). Electro Voice RE-2Pro Features: 30 mW typical output 1112 Channel wireless bodypack transmitter Can be used for mic or guitar/instrument (mic or cord not included) >8 hours life with 9V alkaline battery External 1/4 wave antenna 3.8"" H x 2.6"" W x 0.92"" D Cellphone-style belt clip Get your Electro Voice RE-2Pro today!"  (less)

with either handheld or belt-pack transmitters, this system includes the SR40 dual receiver and dual PT40 Pro bodypack transmitters with MK/GL instrument cables. The SR40 dual receiver is a half-rack mountable unit with balanced XLR and unbalanced 1/4"" phone outputs on the rear. The receiver features twin internal receiver circuits designed to receive simultaneously. The front panel features dual antenna, volume control and LED indicators. The PT40 Pro body-pack transmitter includes the MK/GL instrument cable. The instrument cable enables direct connection of electric guitars, keyboards and other instruments for wireless operation during performances. The PT40 Pro boasts up to 30 hours of power on a standard single AA alkaline battery. AKG WMS40D/GT/GT Features: Dual Wireless Operation The WMS40 dual systems enable simultaneous operation of 2 transmitters. This system includes 1 SR40 dual receiver and (2) PT40 Pro bodypack transmitters. UHF Operation The WMS40 Series features UHF operation for greater range and low drop-out and noise. Balanced and Unbalanced Output The SR40 dual features a balanced XLR and unbalanced 1/4"" phone output connectors. Comprehensive LED Display The front panel on the SR40 dual features RF reception, Mute and Clip LEDs. AKG WMS40D/GT/GT Specifications: System: Type of System Rack/Table Top Mountable UHF Diversity System RF Carrier Frequency Range US54 / 710.400 MHz Approx. Working Range 330 Feet (100 m) Overall Frequency Response 65Hz to 20kHz Signal-to-Noise Ratio >110 dB(A) Of Channels Single channel, single frequency Of Simultaneous Systems not specified by manufacturer Receiver: Type of Receiver UHF Half Rack Mount Type of Outputs Balanced 3-pin XLR-male, switchable from -30 to +6dB Unbalanced 1/4"" Phone jack (6.5mm) Headphone Monitoring No Power Requirements Current Consumption: 115mA/12V Power Requirement: 120/230 VAC 50/60 Hz Battery Type/Approx. Life not applicable Display RF Status, Mute and Clip LEDs Mounting Options Table Top / Rack Mount (rack-mount hardware included) Antenna Type quarter-wavelength Dimensions (W x D x H) 7.8 x 7.4 x 1.7"" (200 x 190 x 44mm) Weight 5.7 oz (160 g) without batteries Transmitter: Type of Transmitter PT40 Pro Bodypack Type of Input Connector Mini 3-pin XLR Type of Microphone MK/GL Guitar and Instrument Cable Polar Pattern not applicable Interchangeable Mic Heads compatible with AKG microphones and cables featuring a mini 3-pin XLR connection Battery Type/Approx. Life 1x AA 1.5-V alkaline battery typ. 31 hours (for 2200 mAh) Mute Switch Lockable On/Off and Mute available Level Control 0-25dB Gain Control Antenna Type qua"  (less)

microphone operation. The body-pack can be configured for wireless instrument operation when used with the MKGL instrument cable. This system includes the SR40 single receiver, PT40 Pro body-pack transmitter and MKGL instrument cable. The SR40 single receiver is a half-rack mountable unit with balanced XLR and unbalanced 1/4"" phone outputs on the rear. The front panel features a single antenna, volume control and LED indicators. The PT40 Pro body-pack transmitter includes the MKGL instrument cable. The MKGL instrument cable features a mini 3-pin XLR and 1/4"" Phone connectors for wireless operation via the PT40 Pro body-pack. The PT40 Pro boasts up to 30 hours of power on a standard single AA alkaline battery. AKG WMS40/PRO/PT/GT Features: UHF Operation The WMS40 Series features UHF operation for greater range and low drop-out and noise. Balanced and Unbalanced Output The SR40 features a balanced XLR and unbalanced 1/4"" phone output connectors. Comprehensive LED Display The front panel on the SR40 features RF reception, Mute and Clip LEDs. Comprehensive LED Display The front panel on the SR40 features RF reception, Mute and Clip LEDs. AKG WMS40/PRO/PT/GT Specifications: System: Type of System Rack/Table Top Mountable UHF Diversity System RF Carrier Frequency Range 60B / 751.550 MHz Approx. Working Range 330 Feet (100 m) Overall Frequency Response 65Hz to 20kHz Signal-to-Noise Ratio >110 dB(A) Of Channels Single channel, single frequency Of Simultaneous Systems Not Specified by Manufacturer SR40 Single Receiver: Type of Receiver UHF Half Rack Mount Type of Outputs Balanced 3-pin XLR-male, switchable from -30 to +6dB Unbalanced 1/4"" Phone jack (6.5mm) Headphone Monitoring No Power Requirements Current Consumption: 115mA/12V Power Requirement: 120/230 VAC 50/60 Hz Battery Type/Approx. Life not applicable Display RF Status, Mute and Clip LEDs Mounting Options Table Top / Rack Mount (rack-mount hardware included) Antenna Type BNC Dimensions (W x D x H) 7.8 x 7.4 x 1.7"" (200 x 190 x 44mm) Weight 1.4 lbs (630 g) GB40 Guitar Bug Instrument Transmitter: Type of Transmitter Guitar Plug-In Type of Input Connector 1/4"" Phone Male Battery Type/Approx. Life (1)AAA Alkaline Battery: 10 hours CU40 Rechargeable: 5 hours Mute Switch Lockable On/Off and Mute available Level Control Recessed Level Dial Antenna Type External Whip Display Power LED Dimensions 3 x 0.8 x 1.1"" (76 x 20 x 28mm) Weight 28 g / 1 oz Get your AKG WMS40/PRO/PT/GT today!"  (less)

ensure optimal loudspeaker system management in PA-specific applications. Capitalizing on the legendary 480 DriveRack® technology, the DriveRack® PA is able to provide its user with top-tier, pro-level loudspeaker management specifications, yet still remain appealing to the budget-conscious audiophile who requires a tried and true utilitarian workhorse. With its all-inclusive, no-compromise design, the DriveRack® PA has been systematically developed and designed to grow with your system needs for years to come. The DriveRack® PA continues the legacy of DriveRack® series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack® PA was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus™ limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. Features: Stereo Feedback Elimination with 12 feedback notch filters Dual 28-band Graphic EQ Classic dbx® Compressor 120A Sub-harmonic Synthesizer 2x3, 2x4, 2x5, 2x6 Crossover Configurations Stereo Multi-band Parametric EQ Stereo Output Limiters Alignment Delay Pink Noise Generator Auto-EQ with 28-Band RTA JBL® Speaker and Crown Power Amp Tunings with Setup Wizard 25 User Programs / 25 Factory Programs 2 Channel XLR Input and 6 Channel XLR Output Front panel RTA-M XLR input with phantom power 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range TypeIV® Conversion System Full Graphic LCD Display  (less)

agile system with one-touch Auto-ClearScan™, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features. This BPU-2Pro-REF Wireless Bodypack System includes 1112 Channel transmitter transmitter with TA4F connector which is wired for use with the RSB-2 referee mute switch. Electro Voice BPU-2 Features: 30 mW typical output 1112 Channel wireless bodypack transmitter Can be used for mic or guitar/instrument (mic or cord not included) >8 hours life with 9V alkaline battery External 1/4 wave antenna 3.8"" H x 2.6"" W x 0.92"" D Cellphone-style belt clip Get your Electro Voice BPU-2 today!"  (less)