accurate bass response down to well below the audible limit. New Long Stroke Woofer The SW10 features a newly designed long-stroke 25-cm (10"") woofer which achieves exceptionally smooth, accurate low-frequency reproduction, while a built-in high-performance 180-watt power amplifier delivers solid, highly damped power. Variable Pass Filter A variable low pass filter (40 Hz ~ 120Hz) makes it easy to achieve optimum crossover with just about any main speaker system, and a built-in phase switch allows instantaneous phase reversal without having to modify cables or connections. Variable XLR-Type Inputs and Outputs The SW10 features three balanced XLR-type inputs and outputs (the outputs feed the audio signal through to the main speakers) for direct compatibility with professional equipment. Features: Type: Amplified bass-reflex powered speaker Overall Frequency Response: 25Hz ~ 150Hz (-10dB) Maximum SPL: 111dB (1m on axis) Size: ( W x H x D) 328 x 459 x 476mm (12-7/8"" x 18-1/16"" s 18-3/4"") Weight: 26kg (57.3 lbs.) Output Power: 180W at 100Hz. RL = 8 ohms Input Sensitivity/Impedance: INPUT 1~3: -6dB ~ +4dB/10K ohms/ XLR balanced S/N Greater than or = to 100dB (IEC-A weighting) Controls: MASTER VOLUME CONTROL, VARIABLE LOW PASS FILTER (40Hz~120Hz), PHASE Switch (Normal, Reverse), Power Switch: ON/OFF Power Indicator: Green/Red LED: Green = Power ON, Red = Amp. Clipping Power Requirement: US and Canadian models: AC120V 60Hz, European models: AC230V 50Hz, AT models: AC240V 50Hz Power Consumption: 160W"  (less)

Basic 400 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 12" woofer and a 1"HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 12" bass / 1" HF speakers 90? x 60? dispersion 450 watts x 100 watts Freq. response: 60Hz - 18kHz Max .SPL: 125 dB SPL Multi-function housing XLR and 1/4" inputs Mic line input, switchable XLR parallel out Dynamic softclip limiter  (less)

for greater high-frequency clarity and refined sound. The magnetically shielded monitors feature 8 curved Kevlar low-frequency drivers plus high-temperature voice coils and damped rubber surrounds for durability and fidelity. The 1-1/4 natural silk, waveguide-loaded tweeters deliver a high end that's both clear and easy on the ears. Custom-tuned crossovers distribute 130 watts of bi-amplified power for optimal frequency handling by each driver. Features: two-way studio reference monitors deluxe edition delivers extended high-frequency response and refined sound 130 watts of continuous bi-amplified power 8 low-frequency drivers with: - curved Kevlar cones - high-temperature voice coils - damped rubber surround 1-1/4 high-frequency drivers with: - natural silk domes - integrated waveguides magnetic shielding XLR balanced and 1/4 balanced/unbalanced inputs volume control power indicator  (less)

utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 15"" heavy duty woofer. The RXâ„¢14 compression driver is driven by a 50 W class D power amplifier and features a 1.4 titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90° by 40°) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4 TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4 phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature our patented DDTâ„¢ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamountâ„¢ allow maximum utility.Features: Bi-amplified powered system with 200 watts maximum output Both power amps have DDT(TM) compression One 15"" neodymium, 2.375"" voice coil woofer Woofer servo RX(TM) 14 1.4"" titanium compression driver Automatic equal loudness (Fletcher-Munson) compensation Combo jack with 1/4"" TRS & female XLR mic or line-level balanced input Two 1/4"" phone jack inputs for link-out/ link-in capability Molded-in horn has exceptionally smooth response & pattern control Top & side handgrips Pole mount molded-in Top & bottom flyng point inserts"  (less)

Basic 200 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 12" woofer and a 1"HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 12" bass / 1" HF speakers 90? x 60? dispersion 240 watts x 80 watts Freq. response: 65Hz - 18kHz Max .SPL: 118 dB SPL Multi-function housing XLR and 1/4" inputs Mic line input, switchable XLR parallel out Dynamic softclip limiter  (less)

dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 12"" heavy duty woofer. The RXâ„¢14 compression driver is driven by a 50 W class D power amplifier and features a 1.4 titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90° by 40°) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4 TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4 phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature our patented DDTâ„¢ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamountâ„¢ allow maximum utility. Features: Bi-amplified powered system with 200 watts maximum output Both power amps have DDT(TM) compression One 12"" neodymium, 2.375"" voice coil woofer Woofer servo RX(TM) 14 1.4"" titanium compression driver Automatic equal loudness (Fletcher-Munson) compensation Combo jack with 1/4"" TRS & female XLR mic or line-level balanced input Two 1/4"" phone jack inputs for link-out/ link-in capability Molded-in horn has exceptionally smooth response & pattern control Top & side handgrips Pole mount molded-in Top & bottom flyng point inserts"  (less)

Acoustic Space controls. The result is a best-in-class monitor series with excellent off-axis response, minimal distortion, an expansive soundstage and the flexibility to adapt to any production space. The Studiophile CX8 monitor brings exceptionally accurate monitoring to any acoustic environment—establishing a new benchmark in its category. Features n 1.25-inch, silk-dome, high-frequency driver with oversized voice coil and rear chambern 8-inch, Kevlar, long-excursion, low-frequency driver with high-damping rubber surroundn Acoustic Space controls optimize frequency response for your production spacen bi-amplified, class A/B amplifier with external heat sink, recessed mounting and 14-gauge wiring to the transducers:> 80 watts RMS for lows> 40 watts RMS for highsn contoured front baffle with integral OptImage IV waveguiden Neutrik combo input (XLR and ¼ TRS); RCA unbalanced inputn power and volume controlsn ultra-solid, 1-inch front and rear MDF baffles and .75-inch MDF wrap with optimized internal bracingn rear-firing port with internal flare to minimize air turbulencen elegant lacquer paint with soft-touch painted faceplaten recessed amplifier mountingn extensive protection—RF interference, output current limiting, over-temperature, turn on/off transient, subsonic filter and external mains fuse Specifications n frequency response> 38Hz to 30kHz (+/- 3dB) (0 degrees, on tweeter axis)> low-frequency response: -10dB at 28Hz> low-frequency response: -3dB at 38Hz> high-frequency response: -3dB at 30kHz on tweeter axisn off-axis linear frequency response: spatially averaged +/-15º vertically,+/-30º horizontallyn rear-panel trim controls> high-frequency trim: +2dB, 0dB, -2dB above 3kHz> mid-frequency boost in/out: 2dB centered at 2kHz with alow Q bandwidth> low-frequency cutoff: flat, 60Hz and 80Hz> acoustic space: 0dB, -2dB and -4dB above 200Hzn crossover frequency: 2700Hz  (less)

Basic 100 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 10" woofer and a 1" HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 10" bass / 1" HF speakers 90? x 60? dispersion 70 watts x 20 watts Freq. response: 70Hz - 20kHz Max .SPL: 117 dB SPL Multi-function housing XLR and 1/4" inputs Mic/line input, switchable XLR parallel out Dynamic softclip limiter  (less)

Acoustic Space controls. The result is a best-in-class monitor series with excellent off-axis response, minimal distortion, an expansive soundstage and the flexibility to adapt to any production space. The Studiophile CX5 monitor brings exceptionally accurate monitoring to any acoustic environment—establishing a new benchmark in its category. Features 1.25-inch, silk-dome, high-frequency driver with oversized voice coil and rear chamber 5-inch, Kevlar, long-excursion, low-frequency driver with high-damping rubber surround Acoustic Space controls optimize frequency response for your production space bi-amplified, class A/B amplifier with external heat sink, recessed mounting and 14-gauge wiring to transducers: 50 watts RMS for lows 40 watts RMS for highs contoured front baffle with integral OptImage IV waveguide Neutrik combo input (XLR and 1/4 TRS); RCA unbalanced input power and volume controls ultra-solid, 1-inch front and rear MDF baffles and .75-inch MDF wrap with optimized internal bracing flared rear-firing port for lower turbulence elegant lacquer paint with soft-touch painted faceplate recessed amplifier mounting extensive protection—RF interference, output current limiting, over-temperature, turn on/off transient, subsonic Specifications frequency response 50Hz to 30kHz (+/- 3dB) (0 degrees, on tweeter axis). low-frequency response: -10dB at 40Hz low-frequency response: -3dB at 45Hz high-frequency response: -3dB at 30kHz on tweeter axis off-axis linear frequency response: spatially averaged +/-15º vertically, +/-30º horizontally rear-panel trim controls high-frequency trim: +2dB, 0dB, -2dB above 3kHz mid-frequency boost in/out: 2dB centered at 2kHz with a low Q bandwidth low-frequency cutoff: flat, 80Hz and 100Hz acoustic space: 0dB, -2dB and -4dB above 200Hz crossover frequency: 2600Hz  (less)

low-frequency drivers and custom titanium high-frequency driver deliver exceptional smoothness and transparency across the entire audio band, without resonant peaks?and the drivers are impervious to environmental conditions such as heat, humidity, and sunlight. Onboard DSP handles cabinet resonance tuning and crossover optimization to round out an incredibly accurate frequency response. Digital inputs compatible with up to 24-bit/192kHz signals and high-impedance balanced analog inputs insure that your signal path is entirely pristine. Both the specs and the sound are unrivaled at any price, let alone this value. Sold individually, the M-Audio EX66 represents a new high-resolution standard for both 2-channel and multichannel applications. Features: MTM configuration yields wide sweet spot with reduced room reflections two 6? custom linear-piston woofers deliver high durability with exceptional definition and precision 1? titanium dome tweeter produces smooth transparency without high-frequency smearing bi-amplified with 200 watts PWM power per channel DSP-tuned cabinets and crossovers for extremely accurate frequency response with no resonant peaks high-impedance analog inputs (XLR and " TRS balanced) S/PDIF and AES/EBU digital input up to 24-bit/192kHz for total digital studio connectivity 32-bit digital signal processing OptImage II high-frequency wave guide minimizes diffraction Acoustic Space control optimizes low-frequency response based on room placement soft limiter circuit to prevent clipping calibrated volume control/input sensitivity control high-frequency roll-off/boost switch mid-range ?presence? switch (low-Q dip or peak) low-cutoff switch (37Hz, 80Hz, 100Hz) custom-designed MDF cabinet internal adiabatic foam absorbs standing waves and enhances low-frequency response and efficiency dual flange rear-port design to minimize air turbulence and associated friction noise Analog Inputs: XLR balanced, ?"" TRS balanced Digital Inputs: S/PDIF - In and Thru Size: 19""H x 8.25""W x 9.5""D Weight: 24.65 lbs"  (less)

a cohesive and refined sound. The 5 low-frequency driver cones are crafted from Kevlar, an extremely resilient material. Curved cone design coupled with high-temperature voice coils and damped rubber surrounds deliver excellent fidelity and durability. The 1 waveguide-loaded, high-frequency drivers are made of magnetically shielded silk domes for a crisp top end that's gentle on the ears. 70-watt bi-amped power and expertly tuned crossovers round out a first-rate pair of reference monitors with a footprint small enough to fit just about anywhere. Features: deluxe edition delivers extended low-frequency response and refined sound 70 watts of distributed power 5 low-frequency drivers with: curved Kevlar cones, high-temperature voice coils, damped rubber surround 1 high-frequency drivers with: natural silk domes, integrated waveguides, magnetic shielding XLR balanced and 1/4 balanced/unbalanced inputs power indicator volume control  (less)

reference monitors that play from 20,000 Hz all the way down to 56 Hz to cover nearly all frequencies audible to human ears. You can take digital signal out of your computer via USB and input it to M1Active 520 USB thanks to their digital input. Priced attractively for any studio's budget, M1Active 520 USB perform with linearity, clarity, and neutrality typically reserved for monitors that cost much more. REFERENCE MONITORING We built M1Active 520USB around our popular five-inch polypropylene low-frequency driver for full, smooth response in the low end and our one-inch silk dome high-frequency driver for absolute clarity in the highs. Our custom crossover avoids the crucial vocal midrange, ensuring that your mixes sound the way you recorded them. The low-resonance bass reflex cabinet features radiussed edges to reduce edge diffraction and a tuned port for bass extension. A bass boost switch offers low-frequency enhancement to further accommodate for room conditions requiring a little more output in the low end. PROFESSIONAL MONITORING OPTIONS When you reach for the convenient front panel volume control, you can be confident that the power you need will be there with M1Active 520 USB's bi-amplified design delivering 25W to the tweeter and 50W to the woofer. Like the rest of the M1Active series, M1Active 520 USB are magnetically shielded, so there's never an issue of placement near computer screen, LCDs, or hard drives. The front-panel stereo 1/4"" headphone output mutes the loudspeakers when connected. When you connect headphones, the main volume control automatically switches to controlling the headphone output. M1Active 520 USB feature a large, front-panel, bi-color indicator that indicates presence of signal in blue and clipping in red for instant feedback on system status. EXTENSIVE I/O Professional quality analog input jacks are located on the rear. Two balanced-1/4"" inputs enable engineers to connect a stereo source or two mono sources. For convenient recordings, simply connect the stereo output of a mixer. You can create complete recordings with no additional audio interface! The speakers are interconnected using a standard XLR cable for secure, professional connection. For worldwide operation, M1Active 520 USB features a voltage-switchable power supply. USB DIGITAL AUDIO INTERFACE In addition to their capabilities as traditional monitor loudspeakers, M1Active 520 USB monitors contain a USB audio interface. Connected audio sources such as mic preamps and instruments can be recorded directly into your computer at 16-bit, 44.1 or 48 kHz. Simply plug the USB cable into your computer. No special drivers required. And when it's time to listen back to your "  (less)