high-frequency drivers with: natural silk domes, integrated waveguides, and magnetic shielding. XLR balanced and 1/4" balanced/unbalanced inputs. Power indicator. Volume control. MXL 990/MXL 991 Recording Microphone Package. The 990 for vocals with silky highs and tight, solid lows. The 991 for acoustic guitars and drum overheads. 20mm gold-sputtered diaphragms. Comes with carrying case and mic stand adapters. Suited for digital and analog recording. Audio-Technica ATH-M20 Closed-back headphones. Operation Closed-back. Impedance 40 ohms. Maximum Input Power 1,200mW at 1kHz. Weight (less cable) 7.1 oz. (230 g). Frequency Response 30-20,00  (less)

to any production space. The Studiophile CX8 monitor brings exceptionally accurate monitoring to any acoustic environment—establishing a new benchmark in its category. AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','360','height','235','title','M Audio Studiophile CX Active Studio Monitors','src','http://www.americanmusical.com/ItemFiles/Flash/MAudioCX_StudioMonitors','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','http://www.americanmusical.com/ItemFiles/Flash/MAudioCX_StudioMonitors' ); //end AC code M Audio Studiophile CX8 Active Monitor Features 1.25-inch, silk-dome, high-frequency driver with oversized voice coil and rear chamber 8-inch, Kevlar, long-excursion, low-frequency driver with high-damping rubber surround Acoustic Space controls optimize frequency response for your production space Bi-amplified, class A/B amplifier with external heat sink, recessed mounting and 14-gauge wiring to the transducers: 80 watts RMS for lows 40 watts RMS for highs Contoured front baffle with integral OptImage IV waveguide Balanced combo input (XLR and 1/4 inch TRS); RCA unbalanced input Power and volume controls Ultra-solid, 1-inch front and rear MDF baffles and .75-inch MDF wrap with optimized internal bracing Rear-firing port with internal flare to minimize air turbulence Elegant lacquer paint with soft-touch painted faceplate Recessed ampli  (less)

watts PWM power per channel : DSP-tuned cabinets and crossovers for extremely accurate frequency response with no resonant peaks : High-impedance analog inputs (XLR and TRS balanced) : S/PDIF and AES/EBU digital input up to 24-bit/192kHz for total digital studio connectivity : OptImage II high-frequency wave-guide minimizes diffraction : Acoustic Space control optimizes low-frequency response based on room placement : Soft limiter circuit to prevent clipping : Calibrated volume control/input sensitivity control : High-frequency roll-off/boost switch : Mid-range presence switch (low-Q dip or peak) : Low-cutoff switch (37Hz, 80Hz, 100Hz) : Custom-designed MDF cabinet : Internal adiabatic foam absorbs standing waves and enhances low-frequency response and efficiency : Dual flange rear-port design to minimize air turbulence and associated friction noise : Magnetic shielding : Unit Dimensions - 19 H x 8.25 W x 9.5 D; Weight - 24.65 lbs/monitor (without packing)  (less)

for greater high-frequency clarity and refined sound. The magnetically shielded monitors feature 8 curved Kevlar low-frequency drivers plus high-temperature voice coils and damped rubber surrounds for durability and fidelity. The 1-1/4 natural silk, waveguide-loaded tweeters deliver a high end that's both clear and easy on the ears. Custom-tuned crossovers distribute 130 watts of bi-amplified power for optimal frequency handling by each driver. Features: two-way studio reference monitors deluxe edition delivers extended high-frequency response and refined sound 130 watts of continuous bi-amplified power 8 low-frequency drivers with: - curved Kevlar cones - high-temperature voice coils - damped rubber surround 1-1/4 high-frequency drivers with: - natural silk domes - integrated waveguides magnetic shielding XLR balanced and 1/4 balanced/unbalanced inputs volume control power indicator  (less)

heat sink, recessed mounting and 14-gauge wiring to transducers - : 50 watts RMS for lows : 40 watts RMS for highs : Contoured front baffle with integral OptImage IV waveguide : Neutrik combo input (XLR and 1/4 h TRS); RCA unbalanced input : Power and volume controls : Ultra-solid, 1-inch front and rear MDF baffles and. 75-inch MDF wrap with optimized internal bracing : Flared rear-firing port for lower turbulence : Elegant lacquer paint with soft-touch painted faceplate : Recessed amplifier mounting : Extensive protection. RF interference, output current limiting, over-temperature, turn on/off transient, subsonic filter and external mains fuse  (less)

Acoustic Space controls. The result is a best-in-class monitor series with excellent off-axis response, minimal distortion, an expansive soundstage and the flexibility to adapt to any production space. The Studiophile CX8 monitor brings exceptionally accurate monitoring to any acoustic environment—establishing a new benchmark in its category. Features n 1.25-inch, silk-dome, high-frequency driver with oversized voice coil and rear chambern 8-inch, Kevlar, long-excursion, low-frequency driver with high-damping rubber surroundn Acoustic Space controls optimize frequency response for your production spacen bi-amplified, class A/B amplifier with external heat sink, recessed mounting and 14-gauge wiring to the transducers:> 80 watts RMS for lows> 40 watts RMS for highsn contoured front baffle with integral OptImage IV waveguiden Neutrik combo input (XLR and ¼ TRS); RCA unbalanced inputn power and volume controlsn ultra-solid, 1-inch front and rear MDF baffles and .75-inch MDF wrap with optimized internal bracingn rear-firing port with internal flare to minimize air turbulencen elegant lacquer paint with soft-touch painted faceplaten recessed amplifier mountingn extensive protection—RF interference, output current limiting, over-temperature, turn on/off transient, subsonic filter and external mains fuse Specifications n frequency response> 38Hz to 30kHz (+/- 3dB) (0 degrees, on tweeter axis)> low-frequency response: -10dB at 28Hz> low-frequency response: -3dB at 38Hz> high-frequency response: -3dB at 30kHz on tweeter axisn off-axis linear frequency response: spatially averaged +/-15º vertically,+/-30º horizontallyn rear-panel trim controls> high-frequency trim: +2dB, 0dB, -2dB above 3kHz> mid-frequency boost in/out: 2dB centered at 2kHz with alow Q bandwidth> low-frequency cutoff: flat, 60Hz and 80Hz> acoustic space: 0dB, -2dB and -4dB above 200Hzn crossover frequency: 2700Hz  (less)

low-frequency drivers and custom titanium high-frequency driver deliver exceptional smoothness and transparency across the entire audio band, without resonant peaks?and the drivers are impervious to environmental conditions such as heat, humidity, and sunlight. Onboard DSP handles cabinet resonance tuning and crossover optimization to round out an incredibly accurate frequency response. Digital inputs compatible with up to 24-bit/192kHz signals and high-impedance balanced analog inputs insure that your signal path is entirely pristine. Both the specs and the sound are unrivaled at any price, let alone this value. Sold individually, the M-Audio EX66 represents a new high-resolution standard for both 2-channel and multichannel applications. Features: MTM configuration yields wide sweet spot with reduced room reflections two 6? custom linear-piston woofers deliver high durability with exceptional definition and precision 1? titanium dome tweeter produces smooth transparency without high-frequency smearing bi-amplified with 200 watts PWM power per channel DSP-tuned cabinets and crossovers for extremely accurate frequency response with no resonant peaks high-impedance analog inputs (XLR and " TRS balanced) S/PDIF and AES/EBU digital input up to 24-bit/192kHz for total digital studio connectivity 32-bit digital signal processing OptImage II high-frequency wave guide minimizes diffraction Acoustic Space control optimizes low-frequency response based on room placement soft limiter circuit to prevent clipping calibrated volume control/input sensitivity control high-frequency roll-off/boost switch mid-range ?presence? switch (low-Q dip or peak) low-cutoff switch (37Hz, 80Hz, 100Hz) custom-designed MDF cabinet internal adiabatic foam absorbs standing waves and enhances low-frequency response and efficiency dual flange rear-port design to minimize air turbulence and associated friction noise Analog Inputs: XLR balanced, ?"" TRS balanced Digital Inputs: S/PDIF - In and Thru Size: 19""H x 8.25""W x 9.5""D Weight: 24.65 lbs"  (less)

Acoustic Space controls. The result is a best-in-class monitor series with excellent off-axis response, minimal distortion, an expansive soundstage and the flexibility to adapt to any production space. The Studiophile CX5 monitor brings exceptionally accurate monitoring to any acoustic environment—establishing a new benchmark in its category. Features 1.25-inch, silk-dome, high-frequency driver with oversized voice coil and rear chamber 5-inch, Kevlar, long-excursion, low-frequency driver with high-damping rubber surround Acoustic Space controls optimize frequency response for your production space bi-amplified, class A/B amplifier with external heat sink, recessed mounting and 14-gauge wiring to transducers: 50 watts RMS for lows 40 watts RMS for highs contoured front baffle with integral OptImage IV waveguide Neutrik combo input (XLR and 1/4 TRS); RCA unbalanced input power and volume controls ultra-solid, 1-inch front and rear MDF baffles and .75-inch MDF wrap with optimized internal bracing flared rear-firing port for lower turbulence elegant lacquer paint with soft-touch painted faceplate recessed amplifier mounting extensive protection—RF interference, output current limiting, over-temperature, turn on/off transient, subsonic Specifications frequency response 50Hz to 30kHz (+/- 3dB) (0 degrees, on tweeter axis). low-frequency response: -10dB at 40Hz low-frequency response: -3dB at 45Hz high-frequency response: -3dB at 30kHz on tweeter axis off-axis linear frequency response: spatially averaged +/-15º vertically, +/-30º horizontally rear-panel trim controls high-frequency trim: +2dB, 0dB, -2dB above 3kHz mid-frequency boost in/out: 2dB centered at 2kHz with a low Q bandwidth low-frequency cutoff: flat, 80Hz and 100Hz acoustic space: 0dB, -2dB and -4dB above 200Hz crossover frequency: 2600Hz  (less)

a cohesive and refined sound. The 5 low-frequency driver cones are crafted from Kevlar, an extremely resilient material. Curved cone design coupled with high-temperature voice coils and damped rubber surrounds deliver excellent fidelity and durability. The 1 waveguide-loaded, high-frequency drivers are made of magnetically shielded silk domes for a crisp top end that's gentle on the ears. 70-watt bi-amped power and expertly tuned crossovers round out a first-rate pair of reference monitors with a footprint small enough to fit just about anywhere. Features: deluxe edition delivers extended low-frequency response and refined sound 70 watts of distributed power 5 low-frequency drivers with: curved Kevlar cones, high-temperature voice coils, damped rubber surround 1 high-frequency drivers with: natural silk domes, integrated waveguides, magnetic shielding XLR balanced and 1/4 balanced/unbalanced inputs power indicator volume control  (less)