press again for off) as well as remotely from any X10 compatible transmitter. The switch will respond to the ALL LIGHTS ON/ALL UNITS OFF command, and you can dim the light from any X10 transmitter with DIM/BRIGHT control. 500 watts. Trim plate not included. Can only be used with incandescent lights. All X10 compatible 2-wire dimmer switches and modules rely on the conduction path through the incandescent bulb filament and will not work properly with other loads.  (less)

Certified Clam Shell Package  (less)

Night light glows softly in the dark High-fashion wall plate included White UL listed  (less)

lighting Selectable light timer - 5 sec to 25 min White, 2.75 by 1.75 by 4.125, Manufacturer: Heath Zenith  (less)

maintain power during rotation. Includes screwless decorator wall plate for a clean, stylish appearance. Common size fits standard electrical boxes. Easy to install with back wire connections and clear labeling for hot, neutral and ground wires. Premium copper contacts provide consistent plug retention and release. UL listed.  (less)

Clam Shell Package  (less)

installation<li>Gold plated binding post and RCA jacks for excellent sound performance<li>Compatible with Dolby Digital sound systems<li>Accepts up to 12-gauge wire<li>Solderless type<li>High Impact ABS plastic<li>Matching color mounting screws<li>UL approved<li>6.2 2-gang J-box L 10.0 W 3.0 H 10.0  (less)

1-1/4"D * white finish *  (less)

in  (less)

INSTEON SwitchLinc Dimmers (#2476D) come pre-configured and set up to communicate with each other, so once you install the SwitchLincs, there is no setup or programming required in order to control one light with these two switches. The INSTEON SwitchLinc 3-Way Dimmer Kit replaces your existing mechanical wall switches with INSTEON-compatible wall dimmers. These dimmers install easily, attaching to the same wires that your existing wall switches used with the addition of the neutral wire. You won't need an electrician come out to install complicated wiring in order to create a virtual multi-way circuit. Both dimmers will be able to control the same light. Wall plates are sold separately  (less)

to the lights to replace bulbs safely * Power Failure Memory ensures the lights return to the level they were at prior to the power failure * LEDs indicate light level or glow softly as a night light when the dimmer is Off * On Low -- press to turn your lights On to the lowest level when the dimmer is Off * dimmer and wall plate fit standard single-gang electrical boxes; 2- 3- and 4- gang wall plates available as accessories * minimum load is 60W -- you must use at least a 60W bulb; if your lamp has multiple bulbs, the total wattage must add up to at least 60 Watts * not for use with mechanical 3-way or 4-way switched circuits; not for use with fluorescent fixtures * wall plate dimensions: 2.94" wide x 4.69" high x .30" deep * warranty: 1 year  (less)