of generator sets have the advantages of instant response, no waveform distortion and stabilization of both output power factor and frequency. As for pure sine wave power, these units offer a high power factor with strong loading capacity, assuring a wide application area such as; household electrical appliances, computers, communication and medical equipment and other precise instruments. These units also have the advantages of strong capacity of perceptual loading, compact, easy carrying and low noise which make them suitable for outdoor and camping use. Features of the HW2000i include: Easy to operate, complete portability, AC overload protector with indicator light, AC socket with DC protector. The HW2000i specifications are: 2000 continuous watts,2200 maximum watts, 16.7 A @120 Volts, Big-Bore 133cc OHV engine, 1.8 gallon fuel tank, 6.5 hour run time at 50% load, 59 lbs.  (less)

3-year limited warranty, Weight: 14.7 lbs., Manufacturer: DEWALT  (less)

the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8in. and micro-fine adjustments to within 1/64in. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with 100% sealed ball bearings and a durable 8 ft. power cord.  (less)

3/4-inch finished or unfinished hardwood flooring 15 by 3-1/8 by 3-1/4; 11.2 pounds; 7-year limited warranty, Weight: 17 lbs., Manufacturer: Bostitch  (less)

Ah Batteries - BL1830, Optimum Charger - DC18RA, Contractor Bag w/ Wheels, Operating Manual.  (less)

dropped. Automatic indexing for easy bit access and identification. Includes tap & drill selection chart for convenient reference and provides removable cartridges easy to carry bits from case to worksite. Sizes include 1/16" to 1/2" in 1/64" increments.  (less)

The Market, Durashield Housing, Constructed To Withstand Real World Conditions, 2 Speed Gearbox, Optimized For 2 Modes Of Operation, High Torque Mode Produces 475 INLB Of Torque, High Speed Mode Generates 0-1,500RPM/21,000 BPM, Includes Carrying Case, Mag Bit Holder, Side Handle, Bit Case, Hook & Bit.Brute Tough Drill Driver Kit, Full Metal Clutch Ring With 16 Positions, Ratcheting 1/2" Single Sleeve Chuck With Carbide Teeth, Finger Groove For Optimal Professional Hold, Reverse Switch, Durashield Housing Designed To Withstand Daily Use & Abuse, Bit Holder, 2.0 AH Bosch BlueCore Battery System, 2 Batteries & 30 Minute Charger.  (less)

1-year warranty, Weight: 17.3 lbs., Manufacturer: Bosch  (less)

edge * Mounts to door in seconds * Adjustable height rod for repetitive mortise cuts * Standard Equipment: Mortising machine w/ 1 1/2 Peak HP motor #690, height rod assembly (4 each #804960 rods, 1 each #800203 stop, & 1 each #800204 nut), wrench #692677, 3/4 bit #43703, 1 bit #43704, allen wrench #48245, & operating manual  (less)

superb accuracy. Industrial push button controls. Heavy duty one piece steel stand with mounting tabs for extra stability. Large cast iron tables with a precision machined finish will ensure accuracy. Three-knife cutterhead allows rapid cutting while producing a superior finish. Two-way tilting fence with positive stops at 45 degrees and 90 degrees. Dovetailed table ways allow adjustment for continued accuracy. Conveniently mounted center fence controls allow quick adjustment. Infeed and outfeed table height is fully adjustable. A rabbeting ledge is built into the tables. Easy-to-use front handwheels for table adjustment. Front and rear safety knife guards; Three high-speed steel knives; 4" dust chute; Industrial motor and controls; Two-way tilting fence; One-piece welded stand; Jack screw cutterhead;  (less)

accurate cuts. Squarelock Rip Fence Engineered for maximum trueness, the best-in-class fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Large 29 x 21.5 Machined Aluminum Tabletop Easily handles wider stock for greater ripping capacity Gravity-Rise Wheeled Table Saw Stand Patented design  (less)

plug 20-1/2 by 17-1/2 inches; 11-1/2 pounds; 1-year warranty, Weight: 17.1 lbs., Manufacturer: Porter-Cable  (less)

* Dual soft start valves assist in cold weather start up. * Cast iron cylinder enhances pump life. Specifications: * Drive: Direct drive * Horsepower: 2-1/2 Max HP * Tank Size: 4 gal * Power Supply: 120V AC 14 amps, 60 Hz, 2 pole induction motor * CFM @100 PSI: 3.2 CFM * Pump Speed: 3400 rpmIncludes: DeWALT Synthetic Compressor Oil * Pressure regulator  (less)

Measures 28-1/10-by-22-7/10-by-24-1/4 inches (LxWxH); weighs 163 pounds; 2-year limited warranty, Weight: 198 lbs., Manufacturer: Briggs & Stratton  (less)

an extension cord. Performs bevels up to 50deg for great versatility. Cordless: Yes, Blade Diameter (in.): 6 1/2, Volts: 28, Speed - No Load (RPM): 3850, Bevel Capacity (deg): 50, Blade Included: Yes, Battery Included: Yes, Charger Included: Yes, Case Included: Yes  (less)

work piece. The expandable work table is the industry's largest in this class. The single handle speed changer allows you to run the full range of speeds without ever touching a belt and the front mounted digital readout displays the exact speed the spindle is running. It also features a larger motor than any other drill press in its class to handle the heaviest jobs.  (less)

or 220V, 1.5HP motor"  (less)

Accepts optional sanding frame, stand, and fence; Lever action belt release; Variable speed dial; Includes: Sanding Belt - Dust Bag Assembly - SA1050  (less)

Work Area & Lasts 2,000 Hours On Average, Dual Steel Rails Supported By Linear Ball Bearings Ensure Stable, Accurate Cutting, Powerful, Direct Drive 15A Motor Never Slips Or Bogs Down, 9 Positive Stops At 15 Degree, 22.5 Degree, 30 Degree, 45 Degree Left Or Right & 0 Degree For The Most Common Miter Cuts, Additional Positive Stops At 33.9 Degree Left For Model LS1214FL, Electronic Speed Control Maintains Constant Speed Under Load, Soft Start Feature For Controlled Operation, Single Cast Aluminum Base Has Built In Wrench Storage For Operator Convenience, Long Slide Track & Wide Pivot Angle Allow Cross Cuts Up To 4 x 12 Material, Large Turn Base & Adjustable Pivot Fence Supports Larger Stock.  (less)

To 8MM Thick, Replaceable Wear Inserts Protect Housing From Damage, Sands Flush To Vertical Surfaces.  (less)

with battery; 1-year warranty, Weight: 13.02 lbs., Manufacturer: Bosch  (less)