EXCLUSIVE leg stand design for easy assembly Includes a 27" x 36" wood table board for added work surface and work piece support, Manufacturer: Jet  (less)

indexing locks, wrench, legs 119 pounds; 1-year warranty, Manufacturer: JET  (less)

assembly. All motors are totally enclosed and fan-cooled for long life. All 3 models are completely prewired and feature a unique quick connect motor-to-switch plug for easy setup. TRUCK F.O.B. SHIPPING POINT Standard Equipment: Upper blade guide micro-adjustments for quick, accurate setup. V-groove blade guide bar provides you with consistent and positive alignment. Graphite impregnated polymer "JET Blocks" in the blade guides for quicker setup and a cooler running blade. Extra large 15" x 15" cast iron work table is offset to offer you more work area in front of the blade. 3/8" Woodworking blade, 6 teeth per inch. Built-in dust chute.  (less)

steel construction for stability and durability. There are two feed rates, 16 and 20 feet per minute, serrated infeed rollers and smooth outfeed rollers are standard. Angled 4" dust port positions the hose away from work area and provides efficient chip and dust collection. This 16" planer will hog some wood. Don't forget the mobile base to move this unit around, order stock number 708119. Planer will be available fall of 2003.  (less)

tools are needed for adjustments: a three-jaw drill chuck holds your mortising chisels securely, while handwheels control smooth linear and cross table motions. Weighing in at 291 pounds, its heavy-duty cast iron and steel construction provides durability and stability no matter how many mortises you cut. You can also work with angled pieces, thanks to the quick position table mounted swiveling vise clamp. No worries, thanks to JET¿s industry-leading customer service at the end of their toll-free number. Not that you¿ll have problems with this workhorse.  (less)

EXCLUSIVE leg stand design for easy assembly 4" dust port for increased dust collection efficiency, Manufacturer: Jet  (less)

and one-piece welded base Weighs 1,058 pounds; 1-year warranty, Manufacturer: JET  (less)

controls for quick adjustments Extremely quick changeover between jointing and planing functions. Fence does not need to be removed Powerful 3HP induction motor easily handles the toughest jointing and planing tasks, Manufacturer: Jet  (less)

The DELUXE XACTA¿ SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.  (less)

insert cutterhead with staggered carbine inserts yet runs quietly and smoothly. Its exclusive front-mounted table adjustment handwheels make quick, easy and accurate corrections. Extra-long heavy-duty cast iron infeed and outfeed tables with precision-machined finish allow jointing of longer boards without tipping. Best of all, it comes with JET¿s industry-leading customer service professionals standing by to assist from setup to output.  (less)

with built-in sealed storage drawer, Manufacturer: Jet  (less)

with three V-belt transmssion for smooth and consistent power Sets of three steel infeed and outfeed rollers to help in the prevention of snipe, Manufacturer: Jet  (less)

guard/splitter, cast-iron extension wings, 1-piece steel cabinet, 4-inch dust port, table, legs Weighs 438 pounds; 1-year limited warranty, Manufacturer: JET  (less)

gauge and fence assembly, Manufacturer: JET  (less)

EXCLUSIVE leg stand design for easy assembly " dust port for increased dust collection efficiency, Manufacturer: Jet  (less)

XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.  (less)

with built-in sealed storage drawer, Manufacturer: Jet  (less)

with built-in sealed storage drawer, Manufacturer: Jet  (less)

Precision computer balanced wheels eliminate vibration for accurate blade tracking, Manufacturer: Jet  (less)

downs and a see through cover that flip up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble free performance. Powered by a big 71/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four foot stroke. In addition, on board the table is a large miter head complete with stock hold down clamp and a 56-inch miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs; this machine is built to handle any job. FEATURE Sliding table with miter head, hold down and fence Fully adjustable fence with dual digital readout Large table with built-in slider with room for stock feeder 7-inch vertical spindle travel Spindle tilts neg. 5 to pos. 45 degrees Large diameter multiple table inserts Five spindle speeds in forward and reverse with lighted indicator BENEFIT Can accommodate everything from multiple end cuts to tenons Fast and accurate set-up and repeatability Supports large work pieces; added safety option with feeder Allows user to stack tooling Increased versatility with tooling Accommodate virtually any size cutter The correct speed for any job  (less)

for fast angle set-up at 45 degrees in and out and a positive stop for perfect 90. The Parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insure the tables remain perfectly parallel even after years of tough duty. The specially designed solid steel Helical cutterhead consists of six rows of staggered 14 mm inserts precision ground on 4 sides. This system makes fast work of knife changing and never needs adjustment. The big 7-1/2HP motor delivers all the power you will need for even the biggest jobs! FEATURE BENEFIT 7 1 /2HP 3PH motor Capacity to handle the largest work Center-mounted cast ironfence assembly Can support large stock at any angle Helical cutterhead with 4-sidedinsert tooling Quickly change cutting edge with noneed for adjustments and extremelyquiet operations Large 16" x 96" table surface Maximum support for accuracy anda fine finish Full size rabbetting table Supports large workpieces for rabbetsup to 3 /4 inch deep Parallelogram construction Fast set up and maintains tablesin parallel plane even after yearsof tough duty  (less)

inch Length 63 inch Max Distance Spindle to Table ( in.) 17-1/2 Model Number JTM-4VS-1 Motor 2HP, 115/230V, 1Ph, Prewired 230V Net Weight 2420 pound Note Use of static phase converter will void warranty Number of Spindle speeds Variable Overall Dimensions 65-1/2 x 63 x 85 Part Number 690180 Prewired 230V 230V Quill Diameter (in.) 3-3/8 Quill Down feed Rates (IPR) .0015.003.006 Quill Travel (in.) 5 Range of Spindle Speeds (RPM) 604,200 Spindle Taper R-8 T-Slot Centers (in.) 2-1/2 T-Slots Number and Size (in.) 3 and 5/8 Table Cross Travel (in.) 12 Table Longitudinal Travel (in.) 34 Table Size (in.) 9 x 49 Travel of Knee (in.) 16 Travel of Ram (in.) 14-1/2 Width 65.5 inch Work Table Weight Capacity (lbs.) 660  (less)

between. The 2-1/2HP motor provides plenty of power at 2800 rpm at the spindles. Hardened steel gears transmit power to the 21 spindles, assuring many years performance. A large table size of 35" x 20" offers generoussupport for your workpiece. With the 60" adjustable back fence, simply set any of the 4 flip stops provided for exact repetitive drilling every time. Twenty-one quick chucks also come standard, allowing hand removal of all bits for tool free, rapid set-ups. The unique flip down fences have built-in magnifiers for easy tape reading and stay attached to the machine, making it simple to change over from case goods to line drilling. A six position turret stop makes drilling depth adjustments simple. The clamp bar features a grip tite surface assuring pneumatic work hold downs stay in position.FEATURES 2.5HP, 1Ph, 230V Motor Bottom to top drilling 21 spindle gear driven drill head with hardened steel gears 32mm spindle centers 11 right hand and 10 left hand spindles 10mm quick change spindle chucks 3450 RPM spindles Pneumatic boring tilting head 60" adjustable backfence with 4 stops 0" 3-1/8" drilling depth stroke Six position depth stops 2 adjustable fences for small and large panels Mechanical digital readout for boring unit  (less)