policy on their network.By offering unprecedented port density in a stackable switch, the SecureStack B3 allows customers to start small and then keep growing. In addition, customers can upgrade their switches to an Enterasys Secure Network via a license upgrade, providing many of the features that make Enterasys Networks known as the Secure Networks company. Enterasys Secure Networks is the role-based security architecture where every user is assigned an easy-to-deploy, yet highly granular role on the network. The SecureStack B3 supports up to 768 policy rules per switch or stack. Once users are authenticated to the network (using 802.1X, MAC, or optional web authentication), they are then controlled according to the rules of th  (less)

deploy a role-based policy on their network. Enterasys Secure Networks is the role-based security architecture where every user is assigned an easy-to-deploy, yet highly granular role on the network. The SecureStack B3G124-48P B3 supports up to 768 policy rules per switch or stack. Once users are authenticated to the network (using 802.1X, MAC, or optional web authentication), they are then controlled according to the rules of their particular role.  (less)

The serial over IP adapter also offers remote Telnet configuration and support for IP, HTTP, ICMP and TCP network protocols, while providing data transfer rates of up to 115.2Kbps per port.  (less)

maximum frame rate of 6/5 frames per second on each channel independent of resolution.Combining analog camera investments with a network video solution gives a flexible and cost-effective solution with plenty of room for growth. With an open standard interface, the AXIS 240Q supports a large base of existing applications and integrates easily with new ones.The AXIS 240Q offers advanced event handling with video motion detection, I/O control and alarm notification. Pan/tilt/zoom cameras may be connected to the unit's serial port and are easily controlled from a user interface. Security features include multiple user access levels with password protection, IP address filtering and HTTPS encryption.The AXIS 240Q can connect up to four analog cameras and transmit digital video from all four channels simultaneously via an Ethernet connection.  (less)

using its built-in fiber port. Advanced management features include SNMP, VLAN, IGMP, and Port security.  (less)

as Wireless Access Points, VoIP phones and Network Cameras. The series includes a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other POE features include Over-Current Protection and Under-Current Detection. The series is fully compatible with devices that comply with the IEEE802.3af standard and it is capable of inserting power on the data pairs of the MDI.Management features include port based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping, port mirroring, port security and virtual IP Stacking. Virtual IP stacking allows users to manage eight switches via a single IP. Security includes static addressing, filtering and blocking of packets to identified MAC addresses. Two priority queues per port insure minimum delay for voice over IP or multimedia network data. Console port provides local management while Telnet and Web-based management is provided via any network device.Non-blocking 8.8Gbps architecture assures rapid packet delivery while 8, 000 MAC address table provides swift lookup and packet forwarding. Other ASIC features that enhance performance are included such as 802.1d spanning tree, 802.3x flow control, 802.1ad link aggregation and broadcast storm control. Product Description: MiLAN MIL-SM2401MAF - switch - 24 ports Device Type: Switch Form Factor: External Dimensions (WxDxH): 17.3 in x 11 in x 1.7 in Localization: North America Ports Qty: 24 x Ethernet 10Base-T, Ethernet 100Base-TX Data Transfer Rate: 100 Mbps Data Link Protocol: Ethernet, Fast Ethernet Empty Slots: 2 x SFP (mini-GBIC) Remote Management Protocol: SNMP, Telnet, HTTP Communication Mode: Half-duplex, full-duplex Features: Flow control, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, manageable, store and forward, Broadcast Storm Control, half duplex mode, full duplex mode, firmware upgradable Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1ad Power Over Ethernet (PoE): Yes Power: AC 120/230 V ( 50/60 Hz ) UPC: 0648177003891  (less)

that brings the speed of Gigabit copper connectivity to the desktop with the flexibility that comes with Power over Ethernet and the ease of Web-based configuration. Power over Ethernet (PoE) support reduces network installation costs and complexities by enabling the switch to provide power through the Category 5 cable connections, so there's no need to place network devices near a power outlet or run separate power lines to them. Network devices such as Wireless Access Points, IP phones and IP cameras are perfect for installation using PoE. PoE support is complimented in the GS8P-Smart by Quality of Service (QoS) for Voice and Data integrity and VLANs for enhanced Security at the edge of the network. Ideal for the desktop, wiring closet - or anywhere - SMC's SMCGS8P-Smart makes device placement flexible, and a Web-based management user interface makes setup and management fast and easy, so 9k Jumbo Frame Support, Trunking, PoE configuration and more are easy to set up and monitor. Equipped with 8 auto-MDIX ports with 1 combo SFP port, this Gigabit switch is suitable for enterprise or SMB environments that demand high performance and flexible installation. Product Description: SMC EZ Switch 10/100/1000 SMCGS8P-Smart - switch - 8 ports Device Type: Switch Form Factor: External - 1U Dimensions (WxDxH): 13 in x 8 in x 1.7 in Weight: 4.6 lbs RAM: 144 KB Ports Qty: 8 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Transfer Rate: 1 Gbps Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots: 1 x shared SFP (mini-GBIC) Remote Management Protocol: SNMP, HTTP Communication Mode: Half-duplex, full-duplex Features: Auto-sensing per device, power over Ethernet (PoE), auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, port mirroring, store and forward, IP address filtering, firmware upgradable, Quality of Service (QoS) Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af Power Over Ethernet (PoE): Yes Power: AC 120/230 V ( 50/60 Hz ) Manufacturer Warranty: Limited lifetime warranty UPC: 0662698591002  (less)

generator will centralize all of the timing, reducing accumulated timing errors between the individual units that make up a digital recording chain. You can drive either BNC word-clock inputs or coaxial S/PDIF inputs. This allows the SyncGen to work together with a wide variety of digital audio equipment. The ART SyncGen can also double as a system tester by telling you about the status of your BNC word-clock cables and terminations. You can see which pieces of gear are internally terminated, and if a cable is connected properly. A green indicator shows correct 75 Ohm termination. Red indicates an output that is shorted or over-terminated (too low of an impedance). When a termination LED is not illuminated at all, the output is either unconnected or not terminated properly, (open circuit or too high of an impedance). What Is Jitter? Jitter is the variation in the timing of the sample rate. Imagine calling out each second as it ticks off using the second hand of a watch. Now imagine that the watch is shaking so much that you can hardly see the precise position of the second hand. This inability to correctly read the second hand is a source of signal error. Digital systems need to do this millions of times a second since audio samples are broken up into 64 (bit) intervals per sample (44,100 samples/sec. x 64 = 2.822 million bits/sec.) Both recording and playback jitter will create audible errors, however jitter in the recording process is a permanent part of the recording and cannot easily be corrected with standard playback gear. Therefore the Sync Gen should become an indispensable part of the recording and archiving process when professional results are required. ART SyncGen Features Stable & Accurate Time-Base Reference 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176 KHz, 192 KHz Sample Rates Four High-Current 5 Volt BNC Word-Clock Outputs Two Zero Bit Digital Black SPDIF Outputs On Coaxial RCA Connectors LED Indicators Monitor Termination And Operating Status of BNC Outputs Large, Easy To Read Digital Sample Rate Readout Easy Sample Rate Selection With Memory Recall After Power Down Cycle Set Of 75 Ohm BNC Terminators And BNC T Adaptors Included Easy To Read User - Application Manual Included ARTcessories Products ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power... you name it. On stage, in the studio, in your living room, they’re easy to use and a  (less)

the Ethernet ports, which eliminates the need for an uplink port. The DSS-24+ includes support for an optional 2-port 100BASE-FX module with an "SC connector" increasing cable connectivity to other servers and switches. The DSS-24+ is targeted for both small office and small business environments.With the DSS-24+ switching function, Store and Forward is implemented with Rate Adaptation Protocol. RAP is an end-to-end rate-based congestion control mechanism, which ensures data integrity when packets are transmitted. The switching capability of the DSS-24+ allots 256Kbytes of allocated memory buffer per 8-ports. As a result, a complete frame checking and error-filtering scheme helps prevent any packets with errors from bei...  (less)

Serial ATA 1.0 specifications,Supports two independent Serial ATA channels,Independent Link, Transport, and data FIFO,Independent command fetch, scatter/gather, and command execution,Supports Legacy Command Queuing (LCQ),Supports Native Command Queuing (NCQ),Supports Non-zero offsets NCQ,Supports OUt of order data delivery NCQ,Supports FIS-base switching with Port Multipliers,31 Commands and Scatter/Gather Tables per Port,Two LEDs indicate for HDD access,Interface: PCI Express Specification, Revision 1.0a,Port: 2x eSATA Ports,System Requirements: Windows NT, 2000, XP, Server 2003, and Vista (32/64-bit); Mac OS X v10.4,Package Contents: 2-Port eSATA ExpressCard, User Manual, CD Driver  (less)

advanced selection of accessories that ensure maximum convenience and performance for greater productivity.Features:: Compressed air operation: Integrated 1.9 quart (1.8 liter)capacity fluid collection reservoir: Variable control thumb throttle: Swivel air inlet with quick disconnect: Quick disconnect coupler for accessories: Quiet, muffled exhaust: Automatic overflow preventionIncludes:: Brake bleeder: 6 (1.8 m) long bleed hose assembly: 4 (1.2 m) long fluid evacuation hose: Molded base with screws for bench mounting: Automatic fluid refill kit: Hanging hook: 3 Universal bleed screw adapters: User Manual (English/French/Spanish/German)Specifications:Reservoir Capacity: 1.9 quarts (1.8 liters)Working Pressure: 60 - 150 psi (4.1 - 10.3 bar)Vacuum 90 psi (6.2 bar): 26 in. Hg (88 kPa)Air Consumption 90 psi (6.2 bar): 4.3 cfm (2.0 l/s)Flow Rate 60 psi (4.1 bar): 50 oz/min (1460 ml/min) 90 psi (6.2 bar): 70 oz/min (2100 ml/min) 150 psi (10.3 bar): 70 oz/min (2100 ml/min)Inlet Thread Size: 1/4" NPTPackaged Weight: 5.0 lbs. (2.3 kg)Size: 9" tall x 6.5" dia. (230 mm tall x 150 mm dia.)  (less)

venues. It?s internal compressor is extremely powerful, quiet and very efficient. The added on-board DMX allows users to control the unit remotely either via timer or wireless.Technical Specifications:? Power: AC100V/AC120V/AC230V/AC240V, 50Hz-60Hz? Output: 2,800 cu.ft/min? Tank Capacity: 2.5 Liter? Fluid Consumption Rate: 16 hours per Liter? Remote Included: HC-1 (Timer Remote)? Optional Remotes: HCR-1 (Wireless Remote)? Air Pressure: 30 Psi? Weight: 41 lbs. / 18.5 Kg? Dimensions (LxWxH): 19.75?x12.75?x9.75? / 500x320x246mm? Recommended Liquid: Elation HFOG oil base haze fluid  (less)

flow rate Accessories include 6' bleed hose, master cylinder evacuation hose, hanging hook and bleed adaptersModel MITMV6835 extends the capabilities of our MIT6830 vacuum brake bleeder by including our MITMVA6832 Clamp-on Auto-refill Kit. While the bleeder can evacuate up to 2 quarts (2 liters) per minute, the refill kit ensures the master cylinder does not run dry of new fluid, making this kit an extremely efficient method of bleeding hydraulic brake and clutch systems.  Features Swivel air inlet with quick disconnect.  Two refill kit styles ensure a fit to all makes and models of vehicles.Kit includes: Brake bleeder (MIT6830) 6' (1.8 m) long bleed hose assembly 4' (1.2 m) long fluid evacuation hose Molded base with screws for bench mounting Hanging hook 3 Universal bleed screw adapters Clamp-on style auto-refill kit (MITMVA6832) User Manual (English/French/Spanish/German)  (less)

an advanced selection of accessories that ensure maximum convenience and performance for greater productivity.Features:? Compressed air operation? Integrated 1.9 quart (1.8 liter) capacity fluid collection reservoir? Variable control thumb throttle? Swivel air inlet with quick disconnect? Quick disconnect coupler for accessories? Quiet, muffled exhaust? Automatic overflow preventionIncludes:? Brake bleeder? 6' (1.8 m) long bleed hose assembly? 4' (1.2 m) long fluid evacuation hose? Molded base with screws for bench mounting? Automatic fluid refill kit? Hanging hook? 3 Universal bleed screw adapters? User Manual (English/French/Spanish/German)Specifications:? Reservoir Capacity: 1.9 quarts (1.8 liters)? Working Pressure: 60 - 150 psi (4.1 - 10.3 bar)? Vacuum @ 90 psi (6.2 bar): 26 in. Hg (88 kPa)? Air Consumption @ 90 psi (6.2 bar): 4.3 cfm (2.0 l/s)? Flow Rate @ 60 psi (4.1 bar): 50 oz/min (1460 ml/min) @ 90 psi (6.2 bar): 70 oz/min (2100 ml/min) @ 150 psi (10.3 bar): 70 oz/min (2100 ml/min)? Inlet Thread Size: 1/4'' NPT? Packaged Weight: 5.0 lbs. (2.3 kg)? Size: 9'' tall x 6.5'' dia. (230 mm tall x 150 mm dia.)  (less)

axis 210 network camera superior video quality for professional indoor applications. the axis 210 network camera offers a cost-effective ip-based solution for professional indoor security surveillance and remote monitoring. it delivers superior image quality using progressive scan and provides built-in motion detection and support for advanced event management. the axis 210 delivers motion jpeg images at up to 30 frames per second in all resolutions up to 640x480. it will also be able to provide both full frame rate motion jpeg and mpeg-4 video streams simultaneously. support for mpeg-4 will be offered as a free downloadable upgrade available in q3 2004. mpeg-4 compression mode is ideal for applications where available bandwidth is restricted and higher frame rates are required. the axis 210 connects directly to an ip network. with a built-in web server the axis 210 enables remote monitoring over a local area network or the internet using a standard web browser. backed by the industry s largest base of application software for video and alarm management the axis 210 is an ideal choice for securing offices shops and other facilities. includes camera power supply stand connector kit cd-rom with application software and users manual.superior image quality using progressive scan ccd sensor and advanced video processing.up to 30 frames per second in all resolutions ranging up to 640x480 at different compression levels.supports simultaneous motion jpeg and mpeg-4 streams (where available bandwidth is restricted and higher frame rates are required).built-in web serverbuilt-in video motion detection with pre- and post-alarm buffers.scheduled and triggered event functionality with alarm notification via e-mail tcp http and upload of images via e-mail ftp & http.capability to insert privacy masking custom logo or overlay image in the video stream.up to 20 viewers can directly access the camera simultaneously; virtually unlimited viewers if streamed through an application server.security: multi-user level password protection for restricted camera access plus ip address filtering.easy installation using axis internet dynamic dns service or the windows- based axis ip utility software. -- specifications general - motion jpeg or mpeg-4 based network camera with built-in web server. superior quality ccd image sensor with progressive scan.hardware - axis etrax 100lx 32bit risc cpu 16 mb ram 4 mb flash axis artpec-2 video compression chip with 8 mb ram linux 2.4 kernel watch dog functionality connectors- network: (1) 10baset/100basetx/rj45 port i/o : (1) alarm input (1) alarm output (terminal block) power : 9 vdc/9 w - external power supply included alternative input voltage  (less)

The serial over IP adapter also offers remote Telnet configuration and support for IP, HTTP, ICMP and TCP network protocols, while providing data transfer rates of up to 115.2Kbps per port.  (less)

lead-free technology,Intel PROSet Utility for Windows,Advanced cable diagnostics,Intel backing,Connectors: 4x RJ-45,IEEE standards/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T,Wiring: Category-5, unshielded twisted pair (UTP), 4-pair,Network Management: Wired for Management (WfM) baseline v2.0 enabled for servers,DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support,Remote Installation Services (RIS),Diagnostics (loopback, testability, PHY register access),Advanced configuration and power interface (ACPI) 1.0 power management,Wake on LAN support over PCI-Express,PXE 2.0 enabled through boot read-only memory (ROM),Advanced Software Features: Adapter fault tolerance (AFT),Switch fault tolerance (SFT),Adaptive load balancing (ALB),Fast EtherChannel (FEC),Gigabit EtherChannel (GEC),Teaming support: Scales upto 8 connections,Multiple teams: Supports 4 separate teams, maximum,IEEE 802.3ad (link aggregation control protocol),Test switch configuration: Tested with major switch original equipment manufacturers (OEMs),PCIe Hot Plug/Active peripheral component interconnect (PCI),IEEE 802.1Q VLANs,IEEE 802.3 (z, ab, u, x) flow control support,TCP checksum offload - transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP),IEEE 802.1p,TCP segmentation/large send offload,Interrupt moderation,Controller-processor: Intel 82571GB,Data rate(s) supported per port: 10, 100, and 1000 Mbps,Bus type: PCI-Express 1.0a,Bus width: x4 lane PCI-Express, operable in x4, x8, x16 slots,Bus speed (x4, encoded rate): 10 Gbps uni-directional; 20 Gbps bi-directional,EEPROM-SPI and single EEPROM support,Interrupt levels: INTA, INTB, INTC, INTD,IEEE support: 802.3ab,LEDs: 4 (1/port, link and speed) solid and blinking,Typical power consumption: 4.95W (3.3 V @ 1.5 A),Hardware certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, MIC,Dimensions (WxLxH): 0.75 x 6.6 x 2.35 inch / 1.91 x 16.76 x 5.97 cm  (less)

jumbo frame, up to 9K Bytes Supports IGMP snooping Congestion control on all ports FCC CE IEEE: IEEE 802.3 IEEE 802.3u IEEE 802.ab IEEE 802.3z IEEE 802.3x IEEE 802.1d IEEE 802.1w IEEE 802.1p IEEE 802.1Q IEEE 802.1x IEEE 802.3ad RFC: RFC1213 RFC1493 RFC1643 RFC1757 RFC2674 QoS and traffic management capability Supports ZyXEL iStacking: up to 24 switches can be managed by one IP Web-based management Telnet CLI SNMP v2c RS-232c Local console IP management: static IP or DHCP client System trap: Link up, link down, power on, power off RMON group 1,2,3,9 All port support rule-based port mirroring System configuration backup and restore Firmware upgrade via FTP Access Control List: Wire speed filtering per MAC/IP/TCP/UDP Wire speed rate limiting per MAC/IP/TCP/UDP Wire speed mirroring per MAC/IP/TCP/UDP Rate limiting based on combination of L2/L3/L4 fields using ACL User Security and Authentication: MAC filtering per port secures access to each port Specific MAC forwarding per port: only specified MAC addresses can access the network (port lock) Limit the number of MAC address per port 802.1x port-based security, prevent unauthorized client access to the network Private VLAN provides security and isolation between ports on a switch, ensures that users can not snoop on each other's traffic Network Administration Security: User name/password required for web/telnet/local console administrators Two level security by specific SNMP read/write community Ethernet Switch GS-3012 2 16K MAC Address - IEEE 802.3x (Full-duplex) 50 Hz or 60 Hz 10% to 90% Non-condensing Operating 233940Hour Zyxel Communications Corp. GS-3012 12-port Managed Layer 2 Gigabit Ethernet Switch 12 1488000pps Forwarding Rate For 1000 Mbps Ethernet 148800pps Forwarding Rate For 100 Mbps Ethernet 24Gbps Switching Fabric Non-blocking 17.8Mpps Forwarding Rate 50 W @ Dimension TCP/IP SNMP 2c DHCP FTP GVRP IGMP RSTP 0 °C (32.0 °F) to 45 °C (113.0 °F) Operating -25 °C (-13.0 °F) to 70 °C (158.0 °F) Storage Zyxel 8.82 lb (4 Total) SFP (mini-GBIC) Shared Yes 4 1.77"" Height x 17.32"" Width x 11.81"" Depth Yes 12 x RJ-45 100/1000Base-T LAN 1 x DB-9 Console Management 1 x RJ-45 Management 2 Year 110V AC 220V AC"  (less)

maximum frame rate of 6/5 frames per second on each channel independent of resolution.Combining analog camera investments with a network video solution gives a flexible and cost-effective solution with plenty of room for growth. With an open standard interface, the AXIS 240Q supports a large base of existing applications and integrates easily with new ones.The AXIS 240Q offers advanced event handling with video motion detection, I/O control and alarm notification. Pan/tilt/zoom cameras may be connected to the unit's serial port and are easily controlled from a user interface. Security features include multiple user access levels with password protection, IP address filtering and HTTPS encryption.The AXIS 240Q can connect up to four analog cameras and transmit digital video from all four channels simultaneously via an Ethernet connection.  (less)

maximum frame rate of 6/5 frames per second on each channel independent of resolution.Combining your analog camera investments with a network video solution gives you a flexible and cost-effective solution with plenty of room for growth. With an open standard interface, the AXIS 240Q supports a large base of existing applications and integrate easily with new ones.The AXIS 240Q offers advanced event handling with video motion detection, I/O control and alarm notification. Pan/tilt/zoom cameras may be connected to the unit's serial port and are easily controlled from a user interface. Security features include multiple user access levels with password protection, IP address filtering and HTTPS encryption.The AXIS 240Q can connect up to four analog cameras and transmit digital video from all four channels simultaneously via an Ethernet connection. For surveillance installations that require many AXIS 240Q units, the blade version of the video server is available for use with the AXIS Rack Solution.  (less)

at 30/25 (NTSC/PAL) frames per second.The AXIS 243SA is designed to migrate analog systems into high-performance, IP-based solutions. It offers a number of advanced functionalities such as video motion detection, image upload, scheduled and triggered event functionality with alarm notification.The AXIS 243SA has support for Quality of Service (QoS), which helps secure the necessary bandwidth for streaming video and control commands over a network. A comprehensive set of security features, including multiple user access levels, HTTPS encryption, IEEE802.1X and IP address filtering, ensures secure video handling and configuration.The AXIS 243SA is the ideal choice for casinos, airports, traffic surveillance and prisons - anywhere an analog surveillance system is already installed and full frame rate is needed. The two-way audio support enables identification of suspicious behavior and communication of orders or requests.  (less)

valign="middle"><span class="printon" style="font-weight:bold;">Brand Information</span></td></tr><tr><td height="2"><img src="../Grafx/checkout/r_checkout_line.gif" height="2" width="300" border="0"></td></tr><tr><td height="5"><div class="spacer5"></div></td></tr><tr><td valign="middle"><table cellspacing="0" cellpadding="1" border="0"><tr><td valign="middle"><span class="bodycopy">Brand:&nbsp;</span><span class="printon">Intellinet</span></td></tr><tr><td valign="middle"><span class="bodycopy">Model:&nbsp;</span><span class="printon">502023</span></td></tr></table></td></tr></table></td></tr></table></td></tr></table><table width="100%" cellpadding="3" cellspacing="1" border="0"><tr bgcolor="#FFFFFF"><td><table width="100%" cellspacing="0" cellpadding="0" border="0"><tr bgcolor="#FFFFFF"><td height="5"><div class="spacer5"></div></td></tr><tr bgcolor="#FFFFFF"><td valign="middle"><span class="printon" style="font-weight:bold;">Product Specifications</span></td></tr><tr bgcolor="#FFFFFF"><td height="2"><img src="../Grafx/checkout/r_checkout_line.gif" height="2" width="300" border="0"></td></tr><tr bgcolor="#FFFFFF"><td height="5"><div class="spacer5"></div></td></tr><tr bgcolor='#FFFFFF'><td><span class="bodycopy">Ports:</span><span class="printon">&nbsp;5</span></td></tr><tr bgcolor='#FFFFFF'><td><span class="bodycopy">Speeds:</span><span class="pr  (less)

port-based VLAN and QoS and also monitor the status of each port. The switch provides simple migration scalability and flexibility to handle new applications and data types. TRENDnet's TEG-160WS is powerful and easy-to-use in reducing unnecessary broadcast traffic and enhance network security.  (less)

for each link Wake On LAN: Yes Features: The adapter provides two RJ-45 Ports fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit Ethernet) networking of transfer rate up to 1000 Mbps. RSS Hash Calculation and QoS (IEEE 802.1p) support for client and server application Fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE Package Contents: Gigabit LAN Host Adapter User's Manual Driver CD  (less)

quad (60 fpm) flash rate. The strobe light's design allows for either flange or 1" pipe mounting. The rugged die cast base is specifically designed for vibration resistance and heat dissipation. Its seven support points provide a shock-resistance mounting of the power supply. The strobe light is protected against voltage spikes and surges. This product has a two year warranty (six month warranty for flashtube).  (less)

enables the independence of the operating systems device driver from the underlying HBA platform, will allow OEMs and end users to migrate to this new system architecture seamlessly (without having to change or rewrite drivers utilities and other management tools). Emulex's firmware-based architecture, which allows for new features and other upgrades without costly changes to the adapter hardware, provides the kind of technical flexibility and investment protection that is critical when working with new and evolving technology. HBAnyware: Centralized HBA management suite MultiPulse: Dynamic load balancing EMC eLab Tested and Qualified 4-lane negotiation Quad Data Rate (QDR) SRAM Unified Data Buffer and Code Space memory 64+ Buffer-to-Buffer Credits supported (per channel) 2K+ Contexts Cached Onboard (per channel) 3.3V signaling, 5V tolerant Digital diagnostics ""smart"" interface supported Bracket: Standard bracket Airflow Required: 100 lf/m Upgradeable firmware based architecture Operating System: Windows Server 2003 Windows 2000 NetWare Linux (open build and open source) Hardware: x86 Intel Itanium processor family IETF IP over FC PCI Express Base Spec 1.0a PCI Express Card PCI Express to PCI/PCI-X Bridge Spec 1.0 Agency Approvals (planned): Class 1 Laser Product per DHHS 21CFR (J) & EN60825 UL recognized to UL 65950-1 CUR recognized to CSA22.2, No. 65690-1-03 TUV certified to EN60950 FCC rules, Part 15, Class A ICES-003, Class A EMC Directive 89/336/EEC (CE Mark) EN55022, Class A EN55024 Australian EMC Framework (C-Tick Mark) AS/NZS 3548, Class A VCCI: Class A MIC (Korea): Class A BSMI (Taiwan): Class A Fibre Channel Host Bus Adapter LP1050EX-E 3 Year 50/125 µm Multi-mode Fiber Fibre Channel 62.5/125 µm Multi-mode Fiber Fibre Channel Half-length Hot-swappable 5% to 95% Non-condensing Relative Humidity Emulex Corporation LightPulse LP1050Ex Host Bus Adapter 1 x LC Fibre Channel LightPulse FC-FS FC-PH FC-PI FC-FCP FC-FCP2 FC-AL FC-PLDA FC-MI FC-FLA 984.25 ft 50/125 µm Multi-mode Fiber @ 2 Gbps 492.13 ft 62.5/125 µm Multi-mode Fiber @ 2 Gbps -40 °C (-40.0 °F) to 70 °C (158.0 °F) Storage LP10000 Emulex Class 2 Class 3 4.38"" Height x 6.6"" Width 1.06Gbps Fibre Channel 2.12Gbps Fibre Channel"  (less)

Experienced growers consider the ideal pH for most crops to fall between 5.5 and 6.5. Users of General Hydroponics nutrient products generally do not experience problems maintaining the proper pH range because our formulas are pH buffered. However, some important exceptions do exist. Acid content can reach unacceptable levels when nutrient solutions are mixed with poor quality water, or when pH unstable media – such as rock wool or gravel products – are used, or when high plant growth rates destabilize the nutrient mix due to rapid nutrient absorption by the crop. pH UP™ pH Adjusting Solution This Base solution is formulated using Potassium Hydroxide and Potassium Carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level. pH DOWN™ pH Adjusting Solution The Acid formulation uses food grade Phosphoric acid to lower the pH to the proper level.  (less)

RJ-45,IEEE standards/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T,Wiring: Category-5, unshielded twisted pair (UTP), 4-pair,Adapter Product Features:Intel PROSet Utility and Intel PRO Intelligent Install for easy installation,Intel lead-free technology,Plug and play specification support: Standard,Auto-negotiation, full-duplex capable,Intel I/OAT,Integrated media access control (MAC) and physical layer (PHY),Includes a full-height bracket (does not include a low-profile bracket),Cable distance: 100m in Category-5 for 100/1000 Mbps; and Category-3 for 10 Mbps,Network Management:Wired for Management (WfM) baseline v2.0 enabled for servers,DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support,Remote Installation Services (RIS),Diagnostics (loopback, testability, PHY register access),Advanced configuration and power interface (ACPI) 1.0 power management,Wake on LAN support over PCI Express,PXE 2.0 enabled through boot read-only memory (ROM),Advanced Software Features:Adapter fault tolerance (AFT),Switch fault tolerance (SFT),Adaptive load balancing (ALB),Fast EtherChannel (FEC),Gigabit EtherChannel (GEC),Teaming support: Scales upto 8x connections,Multiple teams: Supports 4x separate teams,IEEE 802.3ad (link aggregation control protocol),Test switch configuration: Tested with major switch original equipment manufacturers (OEMs),PCIe Hot Plug/Active peripheral component interconnect (PCI),IEEE 802.1Q VLANs,IEEE 802.3 (z, ab, u, x) flow control support,TCP checksum offload transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP),IEEE 802.1p,TCP segmentation/large send offload,Interrupt moderation,Technical Features:Data rate(s) supported per port: 10, 100, and 1000 Mbps,Bus type: PCI Express 1.0a,Bus width: x4 lane PCI Express, operable in x4, x8, x16 slots,Bus speed (x4, encoded rate): 10Gbps uni-directional; 20Gbps bi-directional,EEPROM-SPI and single EEPROM support,Interrupt levels: INTA,IEEE support: 802.3ab,Hardware certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, MIC,Controller-processor: Intel 82571GB,Typical power consumption: 4.95 W (3.3 V @ 1.5 A),LEDs: 4 (1/port, link and speed) solid and blinking,Dimensions (WxLxH): 0.85 x 5.1 x 4.725 inch / 2.16 x 12.95 x 12 cm  (less)

Experienced growers consider the ideal pH for most crops to fall between 5.5 and 6.5. Users of General Hydroponics nutrient products generally do not experience problems maintaining the proper pH range because our formulas are pH buffered. However, some important exceptions do exist. Acid content can reach unacceptable levels when nutrient solutions are mixed with poor quality water, or when pH unstable media – such as rock wool or gravel products – are used, or when high plant growth rates destabilize the nutrient mix due to rapid nutrient absorption by the crop. pH UP™ pH Adjusting Solution This Base solution is formulated using Potassium Hydroxide and Potassium Carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level. pH DOWN™ pH Adjusting Solution The Acid formulation uses food grade Phosphoric acid to lower the pH to the proper level.  (less)