Recent Searches [ clear ]
|
 | LED Light - Increased visibility in low light applications LitheonTM Batteries - The most advanced Lithium-ion battery available allows more battery charges, longer run time and more power 3/8¿ Single Sleeve Chuck - For quick accessory changes ¿ uses standard drill bits 20 Position Clutch - Enables precision driving and no over torque in soft base materials 0-370 RPM / 0-1,100, 221 in-lbs torque, 2.2 lbs, Manufacturer: BOSCH (less)Bosch | $131 - $151  2 Merchants |
|  | Variable speed (0-1,800 RPM) for a wide range of drilling and driving applications Compact design at only 12-3/8" long and weighs only 3.5 lbs. for reduced operator fatigue 3/8" Keyed Metal Chuck for improved bit gripping power and a lower profile for use in close quarters applications Built-in L.E.D. light illuminates the work area Ergonomic shape fits like a glove with even pressure and easy control, Manufacturer: Makita (less)Makita | $164 - $167 2 Merchants |
|  | For rough shaping wood and smoothing fiberglass. 1/8" shank. No. 430: Coarse, 60 grit No. 431: Coarse, 60 grit, 6 per pack No. 438: Fine, 120 grit, 6 per pack Dremel - 438 | $1 - $11 4 Merchants |
|  | mfr: BLACK & DECKER - DEWALT DWS7085 MITER SAW LASER DeWalt - DWS7085 | $25 - $63 3 Merchants |
|  | 2-speed (0-1,500/0-400) all metal gear box--up to 35% faster drilling / fastening and Milwaukee durability Powerful motor: delivers 250 in/lbs of torque-- up to 25% more torque 3/8-inch single sleeve ratcheting metal chuck--Increased bit retention and durability M12 radio is equipped with premium weatherproof aluminum speakers Contains a weather sealed MP3 compartment, Manufacturer: Milwaukee (less)Milwaukee | $179 - $338 2 Merchants |
|  | Dremel Cut-Off Disc Ideal for cutting, grooving and trimming all kinds of materialsincluding metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more .025" Thick 15/16''-Diameter Use Dremel - 409 | $3 - $24 4 Merchants |
|  | 5 Pack, 3" 24 Tooth Metal Cutting Jig Saw Blade, For Metal Less Than 1/8", For Thin Material, Straight Cuts In Metal, Non-Ferrous Metal, Aluminum, Sheet Metal 1/16" - 1/8", Fits Bosch Models 1581AVS, 1581AVSK, 1584AVS, 1584AVSK, 1587AVS, 1587AVSK, 1587AVSP, As Well As Other Older Bosch Models. (less)Bosch - T118A | $1 - $9 5 Merchants |
|  | DREMEL DIAMOND WHEEL POINT SET::Diamond Particle Covered Bits, For Detail Work, Cutting, Engraving, Carving, Touch Up & Finishing.:Use On Wood, Jade, Ceramic, Glass, Hardened Steel, Semi Precious Stones & Other Hard Materials.:Removes material quickly and easily.:For curved surfaces.:Rotary tool.:1/8" shank.:3/32" Dremel - 7150 | $4 - $26 4 Merchants |
|  | 3-1/4" planer blades. Set of double-edged reversible carbide blades for use with Makita model No. N1900B and 1902X7 planers. Makita - D-07945 | $9 - $10 2 Merchants |
|  | Includes 18 Volt Cordless BLUECORE 1/2" High Torque Impact Wrench - 21618, (2) 18 Volt Cordless BLUECORE 2.4 Ah Batteries - BAT181, 9.6-24 Volt BLUECORE 30-Minute Charger - BC130, Carrying Case. Bosch - 21618 | $347 - $519 3 Merchants |
|  | 2-1/2", Power Change Bi-Metal Hole Saw, Bi-Metal Cuts Through Wood, Metal, Stainless Steel & Plastics, 1 Mandrel Is All You Need With The Power Change System, A Heavy Duty Hex Shank Provides Easy Change Out Of Any Size Hole Saw, No Pliers Needed, Threadless Design Prevents Seizing In The Mandrel. (less)Bosch - HB250 | $4 - $12 3 Merchants |
|  | 2,500 Count, Heavy Duty, 1-1/4", 20°ree. Angled Galvanized Finish Nail For The Dewalt Cordless Angled Nailer, Box. DeWalt - DCA16125 | $9 - $14 5 Merchants |
|  | Steel reinforced. For use with 4" and 4 1 2" grinders. 5 8 11 locking nut. Maximum speed 10,000 RPM. DeWalt - DW4945 | $9 - $102 4 Merchants |
|  | DCD950 XRP¿ 18V cordless hammerdrill with patented 3-speed all-metal transmission and ½¿ self-tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention DC827 18V Impact Driver delivers 1,330 in-lbs of torque and 0-2,400 rpms offering power and speed to perform a wide range of fastening applications at faster speeds, Manufacturer: DEWALT (less)DeWALT | $339 - $359 2 Merchants |
|  | Economical way to convert your Milwaukee Sander Grinder for Sanding :The Phenolic Disc Assembly is an economical way to convert your Milwaukee Sander Grinder for Sanding operations. :Milwaukee 49-36-6000 Phenolic Pad Assembly :Convert your Milwaukee Sander Grinder for Sanding operations :48-80-6000 7" Phenolic Disc :5/8"-11 threaded Disc Nut 49-40-0350 :Rubber Pad 49-36-3500 :Compatibility 6078 :Can be used on all 6000 RPM Milwaukee and competitive Sanders :Diameter: 7" :Thread: 5/8" - 11 (less)Milwaukee - 49-36-6000 | $20 - $31 4 Merchants |
|  | Includes 12V Cordless Litheon? Max 3/8 Drill/Driver - PS30-2A-RT, 12V Cordless Litheon? Max Impactor Fastening Driver - PS40-2A-RT, Litheon? Flashlight - FL10-RT, (2) 12V Cordless Litheon? Max Batteries, 30-Minute Charger, Case Bosch - CLPK30-120-AMZ | $216 - $240 2 Merchants |
|  | Dremel 3/16" Orange Grinding Wheel Ideal for sharpening chain saw blades, quickly and easily DREMEL MFG CO - 454 | $2 - $21 4 Merchants |
|  | Dremel 1/32" High-Speed Engraving Cutter, 3/32" Shank Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Dremel - 105 | $2 - $11 5 Merchants |
|  | Bosch 85266M Two flute, ball bearing pilot. For fast, smooth and accurate trim cuts. Shielded compact ball bearing pilot. 85266M: A-1/2" B-1" C-1/4" D-2 3/8" Bosch - 85266M | $12 - $15 4 Merchants |
|  | Fatmax Xtreme, 24", Magnetic Level, New Box Beam Design For 5 Times Greater Strength, Rare Earth Magnets For Unbeatable Magnetic Hold, Dual Machined Surfaces, New Magnified Level Vials For Improved Readability, Lifetime Accuracy Warranty. Stanley - 43-625L | $32 - $82 4 Merchants |
|  | Dremel Set of 2 5/32" Blue Grinding Wheels Ideal for sharpening chain saw blades, quickly and easily Dremel - 453 | $3 - $21 5 Merchants |
|  | jigsaws without orbiting action No. T244D: Wood cutting, 4" long, 6 TPI, cuts for curves and plunge cuts, Available Only At Cape No. T119BO: Wood cutting, 3" long, 12 TPI, for narrow curve cutting No. T144D: Wood cutting, 4" long, 6 TPI, for straight cuts, and plunge and curves No. T101AO: Wood cutting, 3" long, 20 TPI, for fine, splinter-free cuts No. T234X: Wood cutting, 4-1/2" long, progressive teeth, for thick and thin materials, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118A: Metal cutting, 3" long, 24 TPI, for thin, straight cuts in metal, nonferrous metal, aluminum, and sheet metal No. T118B: Metal cutting, 3" long, 14 TPI, for straight cuts in metal, nonferrous metal, and aluminum No. T118G: Metal cutting, 3" long, 36 TPI, for very thin material cuts in metal, nonferrous metal, sheet metal, aluminum No. T123X: Metal cutting, 4" long, progressive teeth, for fast cuts in sheet metal, nonferrous metal, and stainless steel, fiberglass, and plastics, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318B: Metal cutting, 5-1/4" long, 14 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318A: Metal cutting, 5-1/4" long, 24 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118AF: Bimetal, 3" long, 24 TPI, for straight cuts in thin metal, nonferrous metal, and aluminum No. T118EF: Bimetal, 3" long, 18 TPI, for straight cuts in thick metal, sheet metal, and plexiglass No. T345XF: Bimetal, 5-1/4" long, progressive teeth, for thick and thin cutting in wood, metal, plastic, particle board, and aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T111CF: Bimetal, 4" long, 8 TPI, for straight cuts in wood, particle board, plastic, nonferrous metal, and aluminum No. T101BF: Bimetal, 4" long, 10 TPI, for straight fine cuts in plywood, plastics, fiberboard, and fiberglass (less)Bosch - T244D | $7 - $11 4 Merchants |
|  | Improved screw thread tightens in half the time. Larger handle for easier tightening. Irwin - 225102 | $2 - $6 5 Merchants |
|  | M18 ½¿¿ Compact Drill/Driver Delivers 400 In-lbs of Torque and is Only 7 ¾¿ Long. M18 Sawzall Reciprocating Saw with Patented Gear-Protecting Clutch and Counter Balance Mechanism. M18 6 ½¿¿ Circular Saw Delivers 3,500 RPM with Magnesium Upper and Lower Guards for Maximum Durability. M18 Work Light Provides a Fold-Away Hook for Hands Free Use and a 135-Degree Rotating Head to Direct Light at the Work Area. Includes: 18V Compact Drill/Driver, Sawzall saw, Circular Saw, Worklight, (2) 18V XC Batteries, Charger, 24T Carbide tipped blade, Rip Fence, Wood blade, Metal blade, Case, Manufacturer: Milwaukee (less)Milwaukee | $385 - $499 2 Merchants |
|  | Carbide tipped teeth, strip setting for stainless steel. Work without orbital action If metal cutting, use cutting oil, turpentine or a mixture of turpentine and petroleum oil to cool blade.SPECIAL CUTTING: Straight cuts in steel, non-ferrous metal 1/16"- 1/8"; stainless Bosch - T118AHM | $21 - $29 4 Merchants |
|  | - Contains 6 drills and 6 taps - Plug taps in sizes (4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 -24 NC, 10 - 32 NF, 1/4 inch - 20 NC) and drill bits in sizes (No. 43, No. 35, No. 29, No. 25, No. 21, No. 7) - 135 degree split point - High carbon steel plug taps are ideal for general purpose threading - Drill and tap combinations produce a thread that is strong and easy to tap - Includes plastic storage case (less)Hanson - 80187 | $16 - $106 4 Merchants |
|  | Safety Glasses 2 allen wrenches ¼" Air fitting, Manufacturer: DEWALT DeWalt | $189 - $520 3 Merchants |
|  | Milwaukee Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast and have a longer life. This blade has a universal tang and fits Milwaukee Jig Saw model 6256-6 and other popular brands. Includes 5 individual blades.FEATURES: 14 TPI, 3-5/8 in. Length, Bi-Metal Construction. 9/32 in. Width, Universal Shank. 5 blades per package. For cutting thick metal over 1/4 in. thick. (less)Milwaukee - 48-42-2190 | $7 - $8 3 Merchants |
|  | Dremel 3/32" High-Speed Engraving Cutter, 3/32" Shank Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Dremel - 107 | $3 - $11 5 Merchants |
|  | Milwaukee Designed Impact Mechanism Provides best in class torque at 475 ft-lbs Milwaukee 4-Pole Motor - For maximum speed and power Compact Size and weight - Reduces user fatigue Overload Protection - Prevents damage to the tool and battery in abusive situations Friction Ring - Allows quick, easy socket changes to increase productivity, Manufacturer: Milwaukee (less)Milwaukee | $199 - $233 2 Merchants |
|
|
