Recent Searches [ clear ]
|
 | LED Light - Increased visibility in low light applications LitheonTM Batteries - The most advanced Lithium-ion battery available allows more battery charges, longer run time and more power 3/8¿ Single Sleeve Chuck - For quick accessory changes ¿ uses standard drill bits 20 Position Clutch - Enables precision driving and no over torque in soft base materials 0-370 RPM / 0-1,100, 221 in-lbs torque, 2.2 lbs, Manufacturer: BOSCH (less)Bosch | $131 - $151  2 Merchants |
|  | 5 Pack, 3" 24 Tooth Metal Cutting Jig Saw Blade, For Metal Less Than 1/8", For Thin Material, Straight Cuts In Metal, Non-Ferrous Metal, Aluminum, Sheet Metal 1/16" - 1/8", Fits Bosch Models 1581AVS, 1581AVSK, 1584AVS, 1584AVSK, 1587AVS, 1587AVSK, 1587AVSP, As Well As Other Older Bosch Models. (less)Bosch - T118A | $1 - $9 5 Merchants |
|  | Includes 18 Volt Cordless BLUECORE 1/2" High Torque Impact Wrench - 21618, (2) 18 Volt Cordless BLUECORE 2.4 Ah Batteries - BAT181, 9.6-24 Volt BLUECORE 30-Minute Charger - BC130, Carrying Case. Bosch - 21618 | $347 - $519 3 Merchants |
|  | 2-1/2", Power Change Bi-Metal Hole Saw, Bi-Metal Cuts Through Wood, Metal, Stainless Steel & Plastics, 1 Mandrel Is All You Need With The Power Change System, A Heavy Duty Hex Shank Provides Easy Change Out Of Any Size Hole Saw, No Pliers Needed, Threadless Design Prevents Seizing In The Mandrel. (less)Bosch - HB250 | $4 - $12 3 Merchants |
|  | Includes 12V Cordless Litheon? Max 3/8 Drill/Driver - PS30-2A-RT, 12V Cordless Litheon? Max Impactor Fastening Driver - PS40-2A-RT, Litheon? Flashlight - FL10-RT, (2) 12V Cordless Litheon? Max Batteries, 30-Minute Charger, Case Bosch - CLPK30-120-AMZ | $216 - $240 2 Merchants |
|  | Bosch 85266M Two flute, ball bearing pilot. For fast, smooth and accurate trim cuts. Shielded compact ball bearing pilot. 85266M: A-1/2" B-1" C-1/4" D-2 3/8" Bosch - 85266M | $12 - $15 4 Merchants |
|  | jigsaws without orbiting action No. T244D: Wood cutting, 4" long, 6 TPI, cuts for curves and plunge cuts, Available Only At Cape No. T119BO: Wood cutting, 3" long, 12 TPI, for narrow curve cutting No. T144D: Wood cutting, 4" long, 6 TPI, for straight cuts, and plunge and curves No. T101AO: Wood cutting, 3" long, 20 TPI, for fine, splinter-free cuts No. T234X: Wood cutting, 4-1/2" long, progressive teeth, for thick and thin materials, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118A: Metal cutting, 3" long, 24 TPI, for thin, straight cuts in metal, nonferrous metal, aluminum, and sheet metal No. T118B: Metal cutting, 3" long, 14 TPI, for straight cuts in metal, nonferrous metal, and aluminum No. T118G: Metal cutting, 3" long, 36 TPI, for very thin material cuts in metal, nonferrous metal, sheet metal, aluminum No. T123X: Metal cutting, 4" long, progressive teeth, for fast cuts in sheet metal, nonferrous metal, and stainless steel, fiberglass, and plastics, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318B: Metal cutting, 5-1/4" long, 14 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318A: Metal cutting, 5-1/4" long, 24 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118AF: Bimetal, 3" long, 24 TPI, for straight cuts in thin metal, nonferrous metal, and aluminum No. T118EF: Bimetal, 3" long, 18 TPI, for straight cuts in thick metal, sheet metal, and plexiglass No. T345XF: Bimetal, 5-1/4" long, progressive teeth, for thick and thin cutting in wood, metal, plastic, particle board, and aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T111CF: Bimetal, 4" long, 8 TPI, for straight cuts in wood, particle board, plastic, nonferrous metal, and aluminum No. T101BF: Bimetal, 4" long, 10 TPI, for straight fine cuts in plywood, plastics, fiberboard, and fiberglass (less)Bosch - T244D | $7 - $11 4 Merchants |
|  | Carbide tipped teeth, strip setting for stainless steel. Work without orbital action If metal cutting, use cutting oil, turpentine or a mixture of turpentine and petroleum oil to cool blade.SPECIAL CUTTING: Straight cuts in steel, non-ferrous metal 1/16"- 1/8"; stainless Bosch - T118AHM | $21 - $29 4 Merchants |
|  | 10.8-volt lithium-ion cordless screwdriver Articulating 5-position head through 90 degrees; good for tight spaces Durable plastic casing, comfortable cushioned grip Includes 2 lithium-ion batteries, 30-minute charger, soft carrying case, 2 bits 6 by 6-1/2 inches; 3-year protection plan, Weight: 6 lbs., Manufacturer: Bosch (less)Bosch - PS10-2 | $135 - $175 3 Merchants |
|  | Micrograin carbide tip designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard plastics. Ball bearing pilot. Provides 10 degree flush bevel cut. Replaceable cutter and bearing. (less)Bosch - 85431M | $12 - $19 3 Merchants |
|  | Micrograin carbide tips (indicated by M at the end of factory number) are designed to keep a sharp cutting edge up to 30 percent longer than standard micrograins. Suitable for use with tough abrasive materials. Can be used for different groove and profile cuts in solid wood, glued boards and hard plastics. Specially designed tip for fast plunge cutting. (less)Bosch - 85250M | $11 - $20 3 Merchants |
|  | Bosch 85245M Single flute. For windows and door cutouts in abrasive insulation materials, plywood and paneling. Drill through pilot for guiding on templet or framing after panel has been mounted. 85245M: A-3/8" B-7/8" C-3/8" D-1 11/32" E-3" Bosch - 85245M | $10 - $14 3 Merchants |
| | Bosch 85244M Pilot Panel Bit 1/4", 1/4" Shk., 1 Flt., C.T.Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch 85244M Pilot Panel Bit 1/4", 1/4" Shk., 1 Flt., C.T. Features:; Single Flute pilot panel bits with drill-through point are for window and door cutouts in abrasive materials, plywood and paneling ; Single Flute Pilot Panel Bits with Drill-through Point ; Item # 85244M; A. Overall Diameter 1/4???; B. Cutting Edge Length 3/4???; C. Shank Diameter 1/4???; D. Shank Length 1???; E. Overall Length 2-9/16???; Material Carbide Tipped; Quantity 1 (less) Bosch - 85244M | $9 - $14 3 Merchants |
|  | 3-5/8", Power Change Bi-Metal Hole Saw, Bi-Metal Cuts Through Wood, Metal, Stainless Steel & Plastics, 1 Mandrel Is All You Need With The Power Change System, A Heavy Duty Hex Shank Provides Easy Change Out Of Any Size Hole Saw, No Pliers Needed, Threadless Design Prevents Seizing In The Mandrel. (less)Bosch - HB363 | $9 - $12 2 Merchants |
| | Bosch 85221M Two flutes, plunge cutting. Designed to give excellent smoothness of cut, balanced cutting with minimal vibration, positive hook angles for efficient cutting, strong webbing and heavy cutter backing give superior bit life, specially designed tip for fast plunge cutting. 85221M: A-1/4" B-5/8" C-1/4" D-1 1/16" E-1 11/16" (less)Bosch - 85221M | $9 - $26 5 Merchants |
|  | 2-1/8", Power Change Bi-Metal Hole Saw, Bi-Metal Cuts Through Wood, Metal, Stainless Steel & Plastics, 1 Mandrel Is All You Need With The Power Change System, A Heavy Duty Hex Shank Provides Easy Change Out Of Any Size Hole Saw, No Pliers Needed, Threadless Design Prevents Seizing In The Mandrel. (less)Bosch - HB212 | $6 - $12 3 Merchants |
|  | 2-1/4", Power Change Bi-Metal Hole Saw, Bi-Metal Cuts Through Wood, Metal, Stainless Steel & Plastics, 1 Mandrel Is All You Need With The Power Change System, A Heavy Duty Hex Shank Provides Easy Change Out Of Any Size Hole Saw, No Pliers Needed, Threadless Design Prevents Seizing In The Mandrel. (less)Bosch - HB225 | $6 - $8 2 Merchants |
|  | 3/4-Inch Wood cutting Quick change Use on: Natural wood; hardwood; plywood; woodcore plywood; chipboard--raw, veneered and laminated; fiber-reinforced composites; sandwich materials; plastics; thin sheet metals. Use Bosch Adapter: AN01, Manufacturer: Bosch Bosch - HB075 | $5 - $13 2 Merchants |
|  | 7/8-Inch Wood cutting Quick change Use on: Natural wood; hardwood; plywood; woodcore plywood; chipboard--raw, veneered and laminated; fiber-reinforced composites; sandwich materials; plastics; thin sheet metals. Use Bosch Adapter: AN01, Manufacturer: Bosch Bosch - HB087 | $4 - $8 3 Merchants |
|  | Power Change hole saw system has a quick change arbor that quickly removes holesaws from mandrel. Easy plug removal. Bi metal hole saw cuts material up to 1 5 8" deep. Will cut through a 2x4. Use for cutting in aluminum, brass, bronze, copper, plastic, st (less)Bosch - HB136 | $4 - $6 2 Merchants |
|  | Includes Airsweep Vacuum Hose Adapter (1-1/4" & 1-1/2") - VAC002. Bosch - VAC002 | $3 - $6 2 Merchants |
|
|
