 | Soft steel handles limit the potential for dangerous fracturing under excessive load. Self ejecting models with spring-loaded ejectors ensure key disengagement after tightening. Jacobs Chuck | $8 - $11  4 Merchants |
|
 | 1/4" Adapt-A-Drive&tmreg. Chuck & Key, Converts Any Cordless Screwdriver To A Mini Drill For Drill Bit Sizes Up To 1/4". DANAHER TOOL GROUP - 30248 | $11 - $30 5 Merchants |
|
 | Precision machined and ground to master gages for maximum performance with Jacobs drill and tap chucks Adapt Jacobs taper to Morse tapers, straight shanks, threaded shanks and Bridgeport tapers Ideal for use with custom tool and work holder designs and for specialized machining applications, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $22 - $36 4 Merchants |
|
 | Jacobs/Danaher Tool KK Chuck Key Chuck Key Chuck Keys And Holders Chuck Key Pilot Size 9/32 Inch Jacobs Equivalent 30052 Used on 74K 22BA 23BA Jacobs - 30052 | $3 - $6 4 Merchants |
|
 | The Jacobs Plain Bearing Chuck is the worlds most widely used for medium or heavy-duty portable, bench or floor mounted power tools. This industrial quality chuck, with fully hardened and ground working components, offers you exceptionally high accuracy, gripping power and durability. Both heavy and medium duty models are available in a wide range of capacities for use on threaded and taper mounted spindles. (less)Jacobs Chuck | $77 - $120 4 Merchants |
|
 | Heavy duty models for threaded mounting; T.I.R. 0.004-Inch maximum at half capacity Jaws center-ground for absolute straightness and alignment One-piece sleeve eliminates crack between driving teeth often found in other designs Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance Each chuck 100-Percent inspected for performance and precision, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $118 - $227 4 Merchants |
|
| Precision machined and ground to master gages for maximum performance with Jacobs drill and tap chucks Adapt Jacobs taper to Morse tapers, straight shanks, threaded shanks and Bridgeport tapers Ideal for use with custom tool and work holder designs and for specialized machining applications, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $17 - $35 4 Merchants |
|
| Heavy duty models for threaded mounting; T.I.R. 0.004-Inch maximum at half capacity Jaws center-ground for absolute straightness and alignment One-piece sleeve eliminates crack between driving teeth often found in other designs Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance Each chuck 100-Percent inspected for performance and precision, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $165 - $296 4 Merchants |
|
| The OEM, standard for accuracy and durability on all types of industrial power and machine tools. Fully hardened and ground working components offer exceptionally high accuracy and gripping power. Jacobs Chuck | $53 - $113 4 Merchants |
|
| The Jacobs Plain Bearing Chuck is the worlds most widely used for medium or heavy-duty portable, bench or floor mounted power tools. This industrial quality chuck, with fully hardened and ground working components, offers you exceptionally high accuracy, gripping power and durability. Both heavy and medium duty models are available in a wide range of capacities for use on threaded and taper mounted spindles. (less)Jacobs Chuck | $83 - $159 4 Merchants |
|
 | Soft steel handles limit the potential for dangerous fracturing under excessive load. Self ejecting models with spring-loaded ejectors ensure key disengagement after tightening. Grizzly - 3685 | $2 - $5 4 Merchants |
|
 | Jaws center-ground for absolute straightness and alignment Through-hardened jaws, Manufacturer: Jacobs Chuck Jacobs Chuck | $34 - $122 3 Merchants |
|
| Jaws center-ground for absolute straightness and alignment Through-hardened jaws, Manufacturer: Jacobs Chuck Jacobs Chuck | $50 - $98 3 Merchants |
|
 | Jacobs Rubber Key Holder DANAHER TOOL GROUP - 30253 | $1 - $3 4 Merchants |
|
 | The Jacobs Plain Bearing Chuck is the worlds most widely used for medium or heavy-duty portable, bench or floor mounted power tools. This industrial quality chuck, with fully hardened and ground working components, offers you exceptionally high accuracy, gripping power and durability. Both heavy and medium duty models are available in a wide range of capacities for use on threadedand taper mounted spindles. (less)Jacobs - 6200 | $65 - $124 4 Merchants |
|
 | Precision machined and ground to master gages for maximum performance with Jacobs drill and tap chucks Adapt Jacobs taper to Morse tapers, straight shanks, threaded shanks and Bridgeport tapers Ideal for use with custom tool and work holder designs and for specialized machining applications, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $20 - $55 4 Merchants |
|
 | Precision tested and certified to .0016-Inch T.I.R. maximum at half capacity Single taper connection eliminates intermediate arbors to assure high tool rigidity and drilling Compact design for machining flexibility Self-tightening feature for maximum gripping power For CNC machining centers in drilling, boring, counter-boring and milling operations requiring heavy penetration, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $425 - $480 2 Merchants |
|
 | Precision tested and certified to .0016-Inch T.I.R. maximum at half capacity Single taper connection eliminates intermediate arbors to assure high tool rigidity and drilling Compact design for machining flexibility Self-tightening feature for maximum gripping power For CNC machining centers in drilling, boring, counter-boring and milling operations requiring heavy penetration, Manufacturer: Jacobs Chuck (less)Jacobs | $334 - $435 2 Merchants |
|
 | Compact design to maximize tool clearance and machining flexibility 60-Degree angle of center Body and center hardened and ground for high durability and extended life Maximum 3,200 RPM, Manufacturer: Jacobs Chuck Jacobs | $257 - $265 2 Merchants |
|
 | For replacement parts on older models that do not have the service kit marking on the nose, order required parts from the list below. Jacobs Chuck | $246 - $247 2 Merchants |
|
 | Keyless - Drill Chucks & Adapters Type: Hi-Torque Keyless Chuck Maximum Capacity: 0.512 In., 1/2, 13 mm Minimum Capacity: 0.039 In., 1/25, 1 mm Mount: J33 Jacobs - 30528 | $238 - $428 3 Merchants |
|
| Keyless - Drill Chucks & Adapters Type: Hi-Precision Keyless Chuck Maximum Capacity: 0.630 In., 5/8, 16 mm Minimum Capacity: 0.118 In., 3/25, 3 mm Mount: J6 Jacobs - 9685 | $237 - $427 3 Merchants |
|
 | Precision tested and certified to .0016-Inch T.I.R. maximum at half capacity All parts are hardened for maximum accuracy and rigidity. Self-tightening feature for maximum gripping power Integrated shank design provides a unit of greater rigidity and precision For CNC machining centers in drilling, boring, counter-boring and milling operations requiring heavy penetration, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $234 - $274 2 Merchants |
|
| Compact design to maximize tool clearance and machining flexibility 60-Degree angle of center Body and center hardened and ground for high durability and extended life Maximum 4,300 RPM, Manufacturer: Jacobs Chuck Jacobs | $197 - $204 2 Merchants |
|
| Compact design to maximize tool clearance and machining flexibility 60-Degree angle of center Body and center hardened and ground for high durability and extended life Maximum 5,000 RPM, Manufacturer: Jacobs Chuck Jacobs | $193 - $237 2 Merchants |
|
| Heavy duty models for threaded mounting; T.I.R. 0.004-Inch maximum at half capacity Jaws center-ground for absolute straightness and alignment One-piece sleeve eliminates crack between driving teeth often found in other designs Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance Each chuck 100-Percent inspected for performance and precision, Manufacturer: Jacobs Chuck (less)Jacobs Chuck | $177 - $315 4 Merchants |
|
| Compact design to maximize tool clearance and machining flexibility 60-Degree angle of center Body and center hardened and ground for high durability and extended life Maximum 6,000 RPM, Manufacturer: Jacobs Chuck Jacobs | $177 - $177 2 Merchants |
|
| For replacement parts on older models that do not have the service kit marking on the nose, order required parts from the list below. Jacobs Chuck | $160 - $162 2 Merchants |
|
 | Automatic fitting for efficient, fast change of tools Machine fitting via DINO238 of Jacobs tapers and UNF thread fittings Self-tightening feature for maximum gripping power Wide range capacity Each chuck 100-Percent inspected for performance and precision, Manufacturer: Jacobs Chuck Jacobs Chuck | $129 - $162 2 Merchants |
|
 | Meet JMBTA Standard MAS 403-1982 5/8 to 11 Internal thread Precision engineered and manufactured to ensure high accuracy, Manufacturer: Jacobs Chuck Jacobs | $124 - $154 2 Merchants |
|
