Lower Blade Reduced Slippage.  (less)

insulation provide protection against electrical shock Custom US-made steel Weight: 1 pound  (less)

hole and let the Nibbler Tool do the rest. By modifying your old case with this affordable tool, you'll have money left over to add additional sound and video cards, cold cathode tubes, and LED fans! And you don't have to stop at case modding. Use the Nibbler Tool to cut shapes into any light-gauge sheet metal, copper, aluminum, or plastic medium.  (less)

Thumb On Bend On Shaft To Snug Up Screw, Made In USA, POP Packaged.  (less)

Looping & Bending Holes, 6-32 & 8-32 Screw-Shearing Holes.Spring-Loaded Action For Self-Opening. Curved Handles Help Reach Into Confined Areas. Double-Dipped Comfort Grips"  (less)

Locking, 1-1/2"W, Black.  (less)

with DYMO labelmakers Office-Mate II and Professional.  (less)

this area.  (less)

The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1. High safety AC current clamp with BNC output Companion to your scope or power quality meter to measure up to 400 A AC. Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating. Specially designed to offer maximum utility in a compact shape. Take accurate current readings without breaking the circuit. Soft non-slippery overmold handle. Optional PM9081/001 BNC/Banana adapter for DMM's Two ranges: 40 A & 400 A, 10 & 1 mV/Amp output. Max. conductor diameter 32 mm. Specifications Nominal current range: 40 A Range: 0.5A to 40 A 400A Range: 5 A to 400 A Basic accuracy: 40 A Range 2% + 0.015 A (45-400 Hz) 400 A Range 2% + 0.04 A (45-400 Hz) Phase Shift: 40 A Range: 0.5 to 1 A: Unspecified 1 A to 5 A: 4° 5 A to 10 A: 3° 10 A to 20 A: 3° 20 A to 40 A: 2° 40 A to 400 A: NA 400 A Range 5 A to 10 A: Unspecified 10 A to 20 A: 2° 20 A to 40 A: 2° 40 A to 400 A: 1.5° Typical Bandwidth: 40 A Range: 5 Hz - 10 kHz 400 A Range: 5 Hz - 10 kHz Output level(s): 40 A Range: 10 mV/A 400 A Range: 1 mV/A Crest Factor: 40 A Range: 3 400 A  (less)

Comfort Grip Handles.  (less)

Comfort Grip Handles.  (less)

bulb (model No  (less)

connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC Included adapter for DMM's Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output Take accurate current readings without breaking the circuit Max. conductor diameter 20 mm CAT III 600V safety rating Specifications Nominal current range: 20 A 200 A Continuous current range: 0.1 A - 24 A 0.5 A - 200 A Maximum Non-Destructive Current: 240 A Lowest measurable current: 0.1 A Basic accuracy: 1.5% +0.5 A (48-65 Hz) (% reading + floorspec) Useable frequency: 40 Hz - 10 kHz Output level(s) 100 mV/A 10 mV/A Safety Specifications Safety: CAT III, 600 V Maximum voltage: 600 V AC Mechanical & General Specifications Warranty: 1 year Maximum conductor diameter: 20 mm Maximum conductor size (busbar): 20 x 5 mm Output cable length: 2.0 m BNC Adapter: Yes BNC to banana adapter included: Yes  (less)

Copper Wire, Fits Into Tight Places, Curved Handles, Serrated Nose For Easy Bending, Shaping & Pulling Of Wire, Wire Looping & Bending Holes, Screw Shearing Holes, Coil Spring Provides Fast Self Opening Action, Handy Closure Lock For Convenient Storage, Double Dipped Comfort Grips.  (less)

with 110...  (less)

100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter One year warranty Specifications: Current range: AC 100A to 1000A Frequency Response: 5 Hz to 100 kHz Output level: 1mV/A to 100 kHz Max. Cond Dia: 2.13" Category: CAT III, 600V  (less)

Receiver display rotates automatically for easy viewing Identifies breakers and fuses Pinpoints opens and shorts Traces wires behind walls and underground Can be used on circuits 0-600V AC/DC Includes: Transmitter, Receiver, Tracer Test Lead Set, Hard Carrying Case, AA Batteries, Instruction Manual  (less)

with 110...  (less)

Self-stripping design eliminates punch hang-ups. Automatically centers holes on standard studs. Conversion kit available to upgrade early models from 24 gauge to 20 gauge maximum capacity.Capacity 709 - 1-5/8" (41.3 mm) and wider studs. 20 gauge (0.9 mm) steel studs. 710 - 2-1/2" (63.4 mm) and wider studs. 20 gauge (0.9 mm) steel studs.  (less)