and NetVanta 3448 are designed to enable mounting in 19" rack.  (less)

of modular and scalable ADTRAN's solutions is provided with a broad range of options for management, network and local loop interfaces.  (less)

and access switching. It contains a high-performance CPU and powerful communications drivers which support applications such as frame relay and call switching.The ATLAS 830 architecture also includes a packet switching and a circuit switching bussing scheme. The result is a system capable of supporting bandwidth requirements of up to 30 T1 or Primary Rate ISDN (PRI) circuits. Designed for standalone or rackmount, the ATLAS 830 provides eight expansion slots that accommodate hot-swappable option modules. (A redundant power supply may be installed in slots 7 and 8, if desired.) A 10/100BaseT Ethernet connection for IP routing and network management is standard with the ATLAS 830. The ATLAS 830 also comes standard with two onboard T1/PRI interfaces. With the ATLAS 830, you can consolidate your voice, data, and video applications into a single platform while optimizing wide area bandwidth and reducing equipment costs. The ATLAS 830 architecture and expansion slots allow for a variety of modules, making it one of the most versatile access systems on the market.  (less)

and access switching. It contains a high-performance CPU and powerful communications drivers which support applications such as frame relay and call switching.The ATLAS 830 architecture also includes a packet switching and a circuit switching bussing scheme. The result is a system capable of supporting bandwidth requirements of up to 30 T1 or Primary Rate ISDN (PRI) circuits. Designed for standalone or rackmount, the ATLAS 830 provides eight expansion slots that accommodate hot-swappable option modules. (A redundant power supply may be installed in slots 7 and 8, if desired.) A 10/100BaseT Ethernet connection for IP routing and network management is standard with the ATLAS 830. The ATLAS 830 also comes standard with two onboard T1/PRI interfaces. With the ATLAS 830, you can consolidate your voice, data, and video applications into a single platform while optimizing wide area bandwidth and reducing equipment costs. The ATLAS 830 architecture and expansion slots allow for a variety of modules, making it one of the most versatile access systems on the market.  (less)

km using two single mode fibers and 1310 nm wavelength optics. Its fully-integrated design provides the management and redundancy features expected of carrier-class broadband multiplexers. Engineered to integrate easily into existing networks, the Total Access OPTI-3 is interoperable with GR-253 compliant SONET multiplexers and supports management functions and alarms over the DCC for manageability within the SONET framework. This configuration includes one OPTI 3 Rack Mount Chassis (1184003L1), one OPTI 3 Controller Card (1184002L1) and one Blank Faceplate (1184005L1).  (less)

the industry. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN products, the MX2800 offers comprehensive management options, including full management and GUI support from ADVISION. It features a VT100 terminal interface for local configuration. To support SNMP and Telnet management, the MX2800 has an integrated 10BaseT Ethernet port. Carriers looking to maximize their copper investment and consolidate their services in the most efficient manner will find the MX2800 will pay off quickly. For example, a bandwidth reseller who is co-located at an unmanned site and backhauling local and long distance voice service can use the MX2800 to gain T1 access off HiCap SONET rings. The MX2800 is also ideal for Competitive Local Exchange Carriers (CLECs) who are also looking for an efficient means for backhauling local and long distance voice to or from the IXC or LEC. As Internet use continues its rapid expansion, Internet Service Providers are also well served with the MX2800's bandwidth consolidation.  (less)

and FT1/T1 products that operates in the shelf. The Smart 16/16e shelf may be configured for 19" or 23" mounting with either AC or DC powering. Load sharing and redundancy are provided with an optional second power supply. The shelf incorporates a mid-plane design that facilitates hot swapping for all devices, including the power supplies.A common controller card is used to configure and control all devices installed in the shelf. Up to 15 additional shelves may be daisy chained and controlled locally or remotely by a VT 100 terminal attached to a single controller card. An optional hand-held 2x16 LCD display and keypad are available for local configuration by connecting directly to the front of the controller card via the RJ-11 jack. The Smart 16e version provides SNMP Management via an embedded SNMP agent. Through the Management Information Base (MIB)-II standard and ADTRAN-supplied enterprise MIBs, the Smart 16e Shelf allows for configuration, monitoring, and troubleshooting of each device using standard SNMP network management programs such as HP OpenView, NetView, and SunNet Manager.  (less)

Service(QoS) features, the NetVanta 1544F is ideal as an aggregation switch for high-bandwidth Voice over IP (VoIP), and converged voice and data networks.The NetVanta 1544F rackmount switch provides 28 Gigabit Ethernet ports, consisting of 24 standard 1 Gbps Small Form-factor Pluggable (SFP) Ethernet ports and four enhanced 2.5 Gbps SFP ports. The enhanced SFP ports support standard 1 Gbps up to 2.5 Gbps data rates. Together the four enhanced SFP ports can provide up to 20 Gbps of bi-directional bandwidth between interconnected NetVanta 1544 switches.  (less)

ISPs, who require a customer premises device that integrates voice and data functions, and provides a viable migration path from TDM to packetbased technology. The Total Access 850 features remote management, an integrated IP router, and special services slots.  (less)

combined into a small, economical, modular platform that will replace a rack of traditional single function access devices. With the ATLAS 550, traditional multiplexed and packet networks are easier to deploy and manage while providing more bandwidth efficiency out of existing or new communications links. The ATLAS 550 provides a new level of communications flexibility by offering many of the features previously found in larger central office, PBX, or router equipment. The ATLAS 550 chassis includes a high-speed multi-protocol backplane and six modular expansion slots: two network interface slots and four user interfaces slots. A wide range of hot-swappable, industry-standard modules are also available to effectively converge your telecommunications and your existing network systems, such as routers, PBX, key systems, video conferencing equipment, remote access servers, LANS, faxes, and telephones. The ATLAS 550 will typically reside at a customer site and perform the functions found in multi-port multiplexers, channel banks, 1/0 cross connect switches, Frame Relay access devices/concentrators/switches, IP routers, and ISDN switches. It also includes an integral voice switchboard and dial plan for dynamically and intelligently switching voice and data calls based on the telephone number dialed. ATLAS 550 supports multiple network technologies including T1/FT1 DSX-1, ISDN, FXS, FXO, V.35 and 10/100BaseT Ethernet and is designed to be used for more cost-effective T1, ISDN or Frame Relay networks. With the modularity of ATLAS 550, users can now support up to 10 FT1s and run traditional switched or multiplexed voice/data traffic, ISDN, or packetized Frame Relay. Users can also run a hybrid mix of network architect...  (less)

and ISPs, who require a customer premises device that integrates voice and data functions, and provides a viable migration path from TDM to packet-based technology. The Total Access 850 features remote management, an integrated IP/IPX router and special services slots.The Total Access 850 is a modular device, with two common slots and eight access slots. Common cards required for operation are a power supply unit (PSU) and a router control unit (RCU). The RCU is a card that currently supports TDM-based applications, but can be easily upgraded to an ATM-based controller as requirements migrate. The RCU includes a T1 network interface, Nx56/64 V.35 interface and built-in IP/IPX router. Six access slots allow the user to combine a variety of voice and data services. Up to six Quad FXS or Quad FXO access modules can be installed to support up to 24 analog voice lines. Other access modules for data applications include the OCU DP and ISDN U-BR1TE. The other two access slots are for future hardware options.Using local or remote inband management, carriers can turn features, functions and access ports on and off. Easy access to modules, common cards, power supplies, and the battery back-up system simplify maintenance procedures. Hot-swappable modules may be replaced without disrupting other units. The four-circuit-per-module design ensures a maximum of only four analog circuits are affected when replacing a module. The Total Access 850 supports several key system features including station-to-station calling, dial-plan entry, local-toll and long distance call routing (based on DTMF digit analysis), and entry and control of flexible routing tables. A compact, NEBS-compliant cabinet suitable for the customer  (less)

and ISPs, who require a customer premises device that integrates voice and data functions, and provides a viable migration path from TDM to packet-based technology. The Total Access 850 features remote management, an integrated IP/IPX router and special services slots.The Total Access 850 is a modular device, with two common slots and eight access slots. Common cards required for operation are a power supply unit (PSU) and a router control unit (RCU). The RCU is a card that currently supports TDM-based applications, but can be easily upgraded to an ATM-based controller as requirements migrate. The RCU includes a T1 network interface, Nx56/64 V.35 interface and built-in IP/IPX router. Six access slots allow the user to combine a variety of voice and data services. Up to six Quad FXS or Quad FXO access modules can be installed to support up to 24 analog voice lines. Other access modules for data applications include the OCU DP and ISDN U-BR1TE. The other two access slots are for future hardware options.Using local or remote inband management, carriers can turn features, functions and access ports on and off. Easy access to modules, common cards, power supplies, and the battery back-up system simplify maintenance procedures. Hot-swappable modules may be replaced without disrupting other units. The four-circuit-per-module design ensures a maximum of only four analog circuits are affected when replacing a module. The Total Access 850 supports several key system features including station-to-station calling, dial-plan entry, local-toll and long distance call routing (based on DTMF digit analysis), and entry and control of flexible routing tables. A compact, NEBS-compliant cabinet suitable for the customer  (less)

module serves as the interface for high-speed routers and other DTE equipment to access the wide area network. Each port of the Quad USSI module can be configured through software to operate at any multiple of 56 or 64 kbps, up to 2.048 Mbps.Using the ATLAS Channel Mapping Utility, a port can be mapped to one or more DS0s of a T1 or T3 circuit, providing high performance connections to remote locations. For switched access applications, ATLAS can be configured to route calls between the Quad USSI module and ISDN (Basic Rate or Primary Rate) circuits. As with all ATLAS components, configuration can be accomplished through a variety of mechanisms, including Telnet or VT 100 emulation. SNMP management is supported for alarm and event reporting. The Quad USSI module supports an 8, 000 bps in-band management channel to communicate with remote ADTRAN TSU devices. This channel is available full-time for sending management information between devices. The Quad USSI module includes an extensive array of diagnostic tools, to assist in identifying and correcting network problems. Included is a built-in Self-Test utility, as well as standards-based 511 test pattern generators and detectors for each of the four ports. Key interface signals from each of the four ports are monitored and displayed, providing real time status of network activity.  (less)

available in singlemode and multimode versions. Measuring only one rack unit high the OCU 45 can be used standalone, wall mounted or mounted in 19-inch or 23-inch shelves, using an optional mounting tray. This compact device gives NSPs a convenient way to extend T3/E3/STS-1 services from their point of presence to their customer and provides enterprise users a powerful tool for extending T3/E3/STS-1 services over fiber in a campus environment.  (less)

firewall, VPN appliance, and DSU/CSU, all in one platform. In addition, the NetVanta 1335, injected with RapidRoute technology, delivers enhanced performance necessary for IP telephony, corporate connectivity and Internet access, even with advanced services enabled.  (less)

one Wide Module slot, two Network Interface Module (NIM) slots and dual 10/100Base-T Ethernet LAN ports for true LAN segmentation or DMZ applications.  (less)

ISPs, who require a customer premises device that integrates voice and data functions, and provides a viable migration path from TDM to packet-based technology. The Total Access 850 features remote management, an integrated IP router, and special services slots.  (less)

available in singlemode and multimode versions. Measuring only one rack unit high the OCU 45 can be used standalone, wall mounted or mounted in 19-inch or 23-inch shelves, using an optional mounting tray. This compact device gives NSPs a convenient way to extend T3/E3/STS-1 services from their point of presence to their customer and provides enterprise users a powerful tool for extending T3/E3/STS-1 services over fiber in a campus environment.  (less)

624 is a cost-effective, fixed-port, IAD designed to support either TDM or emerging packet architectures. This IAD offers enterprise users and integrated communications providers, such as CLECs, ILECs, and ISPs, a means to offer combined voice and data traffic over a single network interface terminating at the customer's premises.  (less)

624 is a cost-effective, fixed-port, IAD designed to support either TDM or emerging packet architectures. This IAD offers enterprise users and integrated communications providers, such as CLECs, ILECs, and ISPs, a means to offer combined voice and data traffic over a single network interface terminating at the customer's premises.  (less)

Internet service providers, and private and public enterprises worldwide, ADTRAN products consistently reduce operating costs and improve network performance.  (less)

supported in a chassis. DSX-1 module is designed for voice integration.This is an optional DSX-1 Card.  (less)

616 is a cost-effective, fixed-port, IAD designed to support either TDM or emerging packet architectures. This IAD offers enterprise users and integrated communications providers, such as CLECs, ILECs, and ISPs, a means to offer combined voice and data traffic over a single network interface terminating at the customer's premises.  (less)

V.35 DTE interface.  (less)

conjunction with the OPTI-6100 OC-3 single-fiber optical multiplexer module, Central Office (OMM3SC);Redundant (1+1) or non-redundant operation;Terminal mode operation;External BITS timing (IN/OUT);Redundant Primary and Secondary timing inputs and outputs;SONET minimum clock;Can supply timing to the tributary modules;Timing can be derived from a tributary module;Hot swap capability;Bridges all DCC channels from the high-speed (HS) interface(s) and mid-speed (MS) interfaces to the system controller module (SCM);Centrally managed by the SCM.  (less)