monitor panels feature a VU meter and offer a choice of a 3 or 4 diameter loudspeaker equipped for connection to 70.7 or 25 volt lines. To enable monitoring of up to five program channels, all units include a 6-position, double pole switch with a positive off position and a volume control for adjusting the level of the monitor loudspeaker. Each monitored circuit connects to two rear-mounted screw terminals. The VU meters are of moving coil design and include a type A meter scale with rear-mounted control for setting unit to 0 dB. Meters are covered by a protective thermoplastic case. This units particular monitor panels are recommended for the operational supervision of control centers in multi-channel commercial and ...  (less)

positive off position and a volume control for adjusting the level of the monitor loudspeaker. Each monitored circuit connects to two rear-mounted screw terminals. The VU meter is of moving coil design and include a type A meter scale with rear-mounted control for setting unit to 0 dB. Meter is covered by a protective thermoplastic case. Attractive front panel is 16-gauge CRS with a unique stamped grille design. Front-mounted volume control and channel selectors are furnished on a black plate with white nomenclature. Assemblies are factory wired and finished in textured black enamel 2RU height.  (less)

terminals for Mics 5 & 6 and telephone input. Output taps include: 8 ohm, 25 volt, 25 volt center tap, 70 volt, and 100 volt, as well as direct 4 ohm, tape out, preamp out, power amp in, and booster out. Other features include: * Dual Equalizer for acoustic shaping or feedback control * Aphex Aural Exciter circuit for added presence and intelligibility * Phantom power * Contour control * Precedence circuitry * Remote volume control * Auto mute on telephone page * Low cut filter * Frequency response: 20-20,000 Hz +0/-1dB (direct), 65-20,000 Hz +0/-2 dB (transformer) * Distortion: 0.5% (max), 0.3% (typical) * Dimensions: 3-1/2" H x 16-1/2" W x 12" D.  (less)

presets * Bass/Treble/Volume/Microphone Gain controls * All call page feature * Can power up to 100 loudspeakers (total power consumed can not exceed 35 watts) * Large easy to read LCD display * Pushbutton tuning * Two way music muting * Outputs: 4, 6, 8 ohms, 25 volt line, and 70 volt line.* Dimensions: 12" W x 10-3/8" D x 3-3/8" H. Net weight: 20 lbs. Manufacturer part #RM350D.  (less)

input can be added to one of the Mic channels or Aux input using an accessory transformer (model WMT-1A). A front panel switch selects Mic 2 or Aux 1 input. A built-in circuit provides microphone precedence over the Aux 2 input when a customer-supplied SPST switch is actuated.Each input has its own volume control; treble and bass controls are included to adjust the tonal balance of the output. The Tel channel includes a screwdriver adjustable volume controls on the rear panel.Balanced and unbalanced outputs are provided for 4 W, 8 W, and 16 W speaker systems and for 25 volt and 70 volt constant voltage systems. Output jacks permit patching in a tape recorder or an additional booster amplifier, or feeding a 500/600 W telephone line when an accessory transformer is used.The C...  (less)

2 Mic/1 Aux and Tel, or 1 Mic/2 Aux and Tel. A second telephone input can be added to one of the Mic channels or Aux input using an accessory transformer (model WMT-1A). A front panel switch selects Mic 2 or Aux 1 input. A built-in circuit provides microphone precedence over the Aux 2 input when a customer-supplied SPST switch is actuated. Each input has its own volume control; treble and bass controls are included to adjust the tonal balance of the output. The Tel channel includes a screwdriver adjustable volume controls on the rear panel. Balanced and unbalanced outputs are provided for 4 W, 8 W, and 16 W speaker systems and for 25 volt and 70 volt constant voltage systems. Output jacks permit patching in a tape recorder or an additional booster amplifier, or fee...  (less)

in various locales. The MA-1212 features 12 inputs with the first 10 capable of microphone and line level signal using XLR / 1/4"" phone combination connectors. Stereo auxiliary line inputs feature L/R phono connectors and accommodate CD players and other playback devices. A paging microphone input automatically attenuates other channels while in use. Speaker outputs are located on a barrier strip and 25V, 70V and 100V outputs are provided for flexible installation in multiple speaker situations. The front panel reveals comprehensive tone and volume control for easy operation. Electro Voice MA-1212 Features: 120 Watt Operation The MA-1212 provides 120-watts of power at 25, 70 and 100 Volts. 12 Inputs Inputs 1 through 10 provide microphone and line level signal via XLR and 1/4"" combination connectors. Channel 1 Priority The first channel is capable of muting other channels when signal is present. Paging Microphone Input Paging microphone input automatically attenuates all open channels when used. 25, 70 and 100 Volt Operation Barrier strip connections feature 25, 70 and 100V speaker output terminals. Stereo Auxiliary Input Stereo Auxiliary input features L/R phono connections for CD players and play back devices. Electro Voice MA-1212 Specifications: Total # Of Inputs: 120 Watts Mic/Line Inputs: 10 Microphone / Line: 1/4"" & XLR combinations Stereo Line Inputs: Aux 1 & Aux 2: L/R RCA In-Line Inputs/Returns: None AUX Sends: No AUX Returns: No Inserts: No BUS (Group) Outputs: Stereo Output Only 2 Trk Master: I/O No ALT I/O: 2 Stereo Auxiliary Line: L/R RCA Phono Monitor Outputs Speaker Outputs: Barrier Strip Terminals 25V, 70V & 100V Balanced Line Out: 3-pin XLR-male Preamp Output: RCA Phono 1V/1K ohm (unbalanced) EQ Section: Tone Controls, Bass: +/- 10dB @ 100Hz Treble: +/- 10dB @ 10kHz Solo/Mute Mute: 40 dB attenuation Channel Level Control: Rotary Controls Trim/Gain Control: No Phantom Power: not specified by manufacturer Metering: No Frequency Response: 50Hz to 15kHz, +/- 3dB Dynamic Range: not specified by manufacturer Signal-to-Noise Ratio Mic: > 52dB Aux: > 65dB Paging: > 65dB Power Amp In: > 90dB Total Harmonic Distortion (THD): < 1% @ 1kHz Power Supply: 108-132 V ac, 50/60 Hz Dimensions: 5.2 x 18.9 x 12.6"" (13.3 x 48 x 32cm) (HxWxD) Weight: 9.0 kg (19.8 lb) Get your Electro Voice MA-1212 today!"  (less)

convenience stores, drug stores, specialty stores and other medium volume checkout environments. Its solid-state construction with no moving parts increases reliability, while the small footprint frees up valuable counter selling space. The Magellan 1400i omni-directional imaging scanner has been optimized to scan both UPC/EAN labeled items and PDF417 bar codes for easy age or ID verification at the point-of-sale. The Magellan 1400i omni-directional imaging scanner also has a targeted scanning mode for reading close-proximity bar codes. Magellan 1400i Bar Code Reader12 ft. DB9 RS-232 CableStandUS Power Supply Supported Interface: RS-232 Operating Voltage: 5.0 Volts Electrical: Gost RTUVULcULNOMEmissions:FCCEN 55022VCCICNS 13438ICES-003Restriction of Hazardous Substances:EU RoHS EAN 8 & 13 with full expansion 8 to 13EAN/JAN Two LabelJAN 8 & 13 with full expansion 8 to 13UCC/EAN 128UPC Versions A&EUPC Supplementals (Bookland & Coupon Code)UPC Add-ons sub 2 or P2UPC Add-on sub 5 or P5UPC Add-on C128Italian PharmacodeGS1 DatabarGS1 DataBar ExpandedGS1 DataBar Expanded StackedGS1 DataBar Stacked OmnidirectionalSupports GTINCode 39 Full ASCIICode 128Interleaved 2 of 5Standard 2 of 5CodabarMSI/PLESSEYPDF 417DataMatrix (ECC 2000)GS1 DataBar Limited Desktop Bar Code Reader Imager MG141010-101-106R Gray Wired 5 to 95% Non-condensing 8 V DC to 5 V DC Datalogic S.p.A 1400i Magellan 1400i Bar Code Reader Magellan 0 °C (32.0 °F) to 40 °C (104.0 °F) Operating -40 °C (-40.0 °F) to 70 °C (158.0 °F) Storage Not Applicable Datalogic Yes RoHS 2 Year 7.13"" Height x 3.23"" Width x 3.82"" Depth 5mil 15.7 oz 0.75"" - 2""@5mil 1.5"" - 3""@6.6mil - PDF417 0.5"" - 4""@7.5mil 0"" - 6""@10mil 1.25"" - 7""@10mil - PDF417 0"" - 8""@13mil - UPC 1"" - 8""@15mil - PDF417 0"" - 9""@20mil Multi-interface 1D 2D Omni-directional 1100line/s"  (less)

additional system zones need to be added. Specifically intended for a wide variety of installation applications, CXA160 is outfitted with both a standard audio input as well as a dedicated priority input, combining to make them very cost-effective two-input by one-output units. Two combination mic/line inputs are actively balanced, with individual adjustable potentiometers for line level input, mic level input, and mic level input with 24-volt DC phantom power. Input 1 and the priority input are divided into four discrete input sections: a combination XLR/TRS connector, Phoenix connector, or barrier strip. Meanwhile, a Parallel output provides handy ""loop-through"" capability - the means to pass un-amplified line level signals downstream to additional amplifiers via barrier strip, Phoenix, 1/4- inch or XLR outputs. Priority announcements can be initiated with external contact closures or adjustable signal threshold levels. External volume control is also possible through a Phoenix connector as well as a user-supplied potentiometer. Further, a two-position Phoenix connector allows the internal fault relay to be connected to redundant systems. Front panel controls include low and high EQ controls which offer 12 dB of boost or cut at 100 Hz and 10 kHz, respectively. A master volume control offers output volume control, while distinctive LEDs indicate power (green), signal (amber), overload (red), and fault (red). The CXA160 provides 160 watts of output power at 100 volts, 70.7 volts, 25 volts and 4 Ohms. An intelligent output stage is fully protected against permanent damage caused by overloading, shorts and thermal faults. CXA160 operates on 100 volts to 240 volts AC (50/60 Hz) and is supplied by a detachable IEC power cord. A combination banana plug/binding post connection is also provided for connecting an external 24-volt DC backup battery. EAW CXA160 Features: Two combination 1/4-inch/XLR/Phoenix,or barrier strip Mic/Line inputs One parallel output on barrier strip, Phoenix,1/4-inch or XLR Selectable 24-volt phantom power Dedicated priority input Internal fault-activated relay External volume control 4-Ohm, 25-volt, 70-volt and 100-volt outputs Automatic changeover to 24-volt DC backup power Universal power supply Applications: Paging Systems Houses of Worship Hotel and Ballrooms Meeting Rooms Schools Offices Foreground/Background Music Systems Get your EAW CXA160 today!"  (less)

convenience stores, drug stores, specialty stores and other medium volume checkout environments. Its solid-state construction with no moving parts increases reliability, while the small footprint frees up valuable counter selling space. The Magellan 1400i omni-directional imaging scanner has been optimized to scan both UPC/EAN labeled items and PDF417 bar codes for easy age or ID verification at the point-of-sale. The Magellan 1400i omni-directional imaging scanner also has a targeted scanning mode for reading close-proximity bar codes. Magellan 1400i Bar Code Reader12 ft. Coiled Keyboard Wedge CableUS Power SupplyStand Supported Interface: Keyboard Wedge Operating Voltage: 5.0 Volts Electrical: Gost RTUVULcULNOMEmissions:FCCEN 55022VCCICNS 13438ICES-003Restriction of Hazardous Substances:EU RoHS EAN 8 & 13 with full expansion 8 to 13EAN/JAN Two LabelJAN 8 & 13 with full expansion 8 to 13UCC/EAN 128UPC Versions A&EUPC Supplementals (Bookland & Coupon Code)UPC Add-ons sub 2 or P2UPC Add-on sub 5 or P5UPC Add-on C128Italian PharmacodeGS1 DatabarGS1 DataBar ExpandedGS1 DataBar Expanded StackedGS1 DataBar Stacked OmnidirectionalSupports GTINCode 39 Full ASCIICode 128Interleaved 2 of 5Standard 2 of 5CodabarMSI/PLESSEYPDF 417DataMatrix (ECC 2000)GS1 DataBar Limited Desktop Bar Code Reader Imager MG141020-101-201R Gray Wired 5 to 95% Non-condensing 8 V DC to 5 V DC Datalogic S.p.A 1400i Magellan 1400i Bar Code Reader Magellan 0 °C (32.0 °F) to 40 °C (104.0 °F) Operating -40 °C (-40.0 °F) to 70 °C (158.0 °F) Storage Not Applicable Datalogic Yes RoHS 2 Year 7.13"" Height x 3.23"" Width x 3.82"" Depth 5mil 15.7 oz 0.75"" - 2""@5mil 1.5"" - 3""@6.6mil - PDF417 0.5"" - 4""@7.5mil 0"" - 6""@10mil 1.25"" - 7""@10mil - PDF417 0"" - 8""@13mil - UPC 1"" - 8""@15mil - PDF417 0"" - 9""@20mil Multi-interface 1D 2D Omni-directional 1100line/s"  (less)

additional system zones need to be added. Specifically intended for a wide variety of installation applications, CXA80 is outfitted with both a standard audio input as well as a dedicated priority input, combining to make them very cost-effective two-input by one-output units. Two combination mic/line inputs are actively balanced, with individual adjustable potentiometers for line level input, mic level input, and mic level input with 24-volt DC phantom power. Input 1 and the priority input are divided into four discrete input sections: a combination XLR/TRS connector, Phoenix connector, or barrier strip. Meanwhile, a Parallel output provides handy ""loop-through"" capability - the means to pass un-amplified line level signals downstream to additional amplifiers via barrier strip, Phoenix, 1/4- inch or XLR outputs. Priority announcements can be initiated with external contact closures or adjustable signal threshold levels. External volume control is also possible through a Phoenix connector as well as a user-supplied potentiometer. Further, a two-position Phoenix connector allows the internal fault relay to be connected to redundant systems. Front panel controls include low and high EQ controls which offer 12 dB of boost or cut at 100 Hz and 10 kHz, respectively. A master volume control offers output volume control, while distinctive LEDs indicate power (green), signal (amber), overload (red), and fault (red). The CXA80 provides 80 watts of output power at 100 volts, 70.7 volts, 25 volts and 4 Ohms. An intelligent output stage is fully protected against permanent damage caused by overloading, shorts and thermal faults. CXA80 operates on 100 volts to 240 volts AC (50/60 Hz) and is supplied by a detachable IEC power cord. A combination banana plug/binding post connection is also provided for connecting an external 24-volt DC backup battery. EAW CXA80 Features: Two combination 1/4-inch/XLR/Phoenix,or barrier strip Mic/Line inputs One parallel output on barrier strip, Phoenix,1/4-inch or XLR Selectable 24-volt phantom power Dedicated priority input Internal fault-activated relay External volume control 4-Ohm, 25-volt, 70-volt and 100-volt outputs Automatic changeover to 24-volt DC backup power Universal power supply Applications: Paging Systems Houses of Worship Hotel and Ballrooms Meeting Rooms Schools Offices Foreground/Background Music Systems Get your EAW CXA80 today!"  (less)

convenience stores, drug stores, specialty stores and other medium volume checkout environments. Its solid-state construction with no moving parts increases reliability, while the small footprint frees up valuable counter selling space. The Magellan 1400i omni-directional imaging scanner has been optimized to scan both UPC/EAN labeled items and PDF417 bar codes for easy age or ID verification at the point-of-sale. The Magellan 1400i omni-directional imaging scanner also has a targeted scanning mode for reading close-proximity bar codes. Magellan 1400i Bar Code Reader2m. USB CableStand Supported Interface: USB Operating Voltage: 5.0 Volts Electrical: Gost RTUVULcULNOMEmissions:FCCEN 55022VCCICNS 13438ICES-003Restriction of Hazardous Substances:EU RoHS EAN 8 & 13 with full expansion 8 to 13EAN/JAN Two LabelJAN 8 & 13 with full expansion 8 to 13UCC/EAN 128UPC Versions A&EUPC Supplementals (Bookland & Coupon Code)UPC Add-ons sub 2 or P2UPC Add-on sub 5 or P5UPC Add-on C128Italian PharmacodeGS1 DatabarGS1 DataBar ExpandedGS1 DataBar Expanded StackedGS1 DataBar Stacked OmnidirectionalSupports GTINCode 39 Full ASCIICode 128Interleaved 2 of 5Standard 2 of 5CodabarMSI/PLESSEYPDF 417DataMatrix (ECC 2000)GS1 DataBar Limited Desktop Bar Code Reader Imager MG140041-001-412R Black Wired 5 to 95% Non-condensing 8 V DC to 5 V DC Datalogic S.p.A 1400i Magellan 1400i Bar Code Reader Magellan 0 °C (32.0 °F) to 40 °C (104.0 °F) Operating -40 °C (-40.0 °F) to 70 °C (158.0 °F) Storage Not Applicable Datalogic Yes RoHS 2 Year 7.13"" Height x 3.23"" Width x 3.82"" Depth 5mil 15.7 oz 0.75"" - 2""@5mil 1.5"" - 3""@6.6mil - PDF417 0.5"" - 4""@7.5mil 0"" - 6""@10mil 1.25"" - 7""@10mil - PDF417 0"" - 8""@13mil - UPC 1"" - 8""@15mil - PDF417 0"" - 9""@20mil Multi-interface 1D 2D Omni-directional 1100line/s"  (less)